MR 130I EVO2 — MOBILE IMPACT CRUSHER

MOBILE IMPACT CRUSHERS

The mobile impact crushers MOBIREX are used in soft to medium-hard natural rock and in recycling. The capacity of the plants is enormous - and the focus is not only on pure volume reduction. Cost and environmental awareness, availability, versatility and, above all, the quality of the final product are important aspects. With the MOBIREX plants stone is crushed so that the grain shape, grain size distribution, and cleanliness meet the high requirements of the standards for concrete and asphalt aggregates.

PROPERTIES

The mobile impact crusher MOBIREX MR 130i EVO2 can be universally deployed and produces first-class final grain quality. With a crusher inlet of 1300 mm and numerous technical highlights, a formidable production rate can be achieved with the best cost effectiveness. Thanks to its compact design, the machine is easy to transport and can be assembled and disassembled quickly.

• Optimized material flow due to opening system widths

• Hydraulic gap setting

• Simple and intuitive SPECTIVE control concept

• Efficient and powerful diesel direct drive

• High-performance secondary screening unit with oversize grain returning (option)

HIGHLIGHTS

Versatile application options, simple transport, short set-up times, high machine availability: The mobile impact crushers MOBIREX EVO2

CONTROL SYSTEM

INTUITIVE CONTROL CONCEPT SPECTIVE – FOR SIMPLE OPERATION

The easy-to-operate control concept SPECTIVE allows the machines to be operated at a touch panel. All components and functions can be controlled comfortably from the group.

SPECTIVE guides the operator step by step through the starting procedure. The start screen provides a graphical view of the plant with all adjustable functions at a glance. When the desired function is selected, clear instructions guide users through all operating steps. If a fault occurs, a fault diagnosis appears on the display. Fault localization, the description and remedy tips result in reduced downtimes. The 12” touch panel is resistant to dust and always easy to read thanks to the light intensity and high contrast. It reacts to fingers, pen, or gloves.

MATERIAL FLOW

CONTINUOUS FEED SYSTEM (CFS) - For a continuous crusher feed.

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

SPECTIVE CONNECT

Operator information App, unidirectional communication

All relevant data at a glance

• Dashboard

• Cameral live image

• Reporting

• Messages and troubleshooting aids

• Overview of all plants in the train

The operator can remain in the excavator/wheel loader

• No interruption to the work process

• Increase in work safety

SAFETY TECHNOLOGY

LOCK & TURN – OUTSTANDING SAFETY SYSTEM

The “Lock & Turn” system provides the highest level of safety during rotor ledge change and releasing bridging. Special keys for service flaps and components guarantee that uncontrolled movements of dangerous components are not possible and the plant or crusher can not be started when maintenance is being carried out.

A standard series rotating device also allows the rotor of the crusher to be turned and blocked manually in any position from the outside. This enables the simple and safe replacement of rotor ledges and removal of material bridging.

QUICK TRACK

ALWAYS IN OPERATION WITH “QUICK TRACK”

In some applications – for example in road construction – relocation of the crushing plant several times a day is necessary. When this is done, the plant should remain in operating mode so that it is quickly ready for operation again after it has been moved. The “Quick Track” option allows this to be controlled conveniently via the remote control – without leaving the operating mode.

Thanks to the time-saving (excavator driver does not need to go to the display, change operating mode, machine operation is not interrupted and therefore does not need to be started up again), the machine can continue working fast and productively.

STANDARD EQUIPMENT

• Hydraulically folding feed hopper, can be operated from ground

• Frequency-controlled vibrating feeder

• Frequency-controlled prescreen

• Prescreen covering with slotted grate or punched plate (upper deck) and wire cloth (lower deck)

• Extended side discharge conveyor 19' 8", rigid: can be mounted on left or right, discharge height approx. 12', must be dismounted for transport, inc. spray system

• Quick Track for setting machine operating mode quickly and easily, operation via radio remote control

• Impact crusher with rotor ledge set made of martensitic

• Continuous feed system (CFS) for optimum crusher loading

• Automatic crusher gap adjustment

• Integrated overload protection

• Rotor lock & turn device: system for securely turning and locking the rotor for maintenance tasks or clearing blockages

• Permanent magnetic separator, magnet preparation

• Post screening unit, in convenient container dimensions, hook-lift compatible, available with 20" and 26" wide oversize grain return conveyor

• Swivel arm for changing rotor ledges

• SPECTIVE control concept: menu-guided user interface, 12-inch control panel; telematics system WITOS FleetView for efficient fleet and service management

• Lockable control cabinet, dust and vibration protected

• LED lighting

• Water spray system for dust reduction

OPTIONS

• Hopper extension: hydraulically folding

• Side discharge conveyor 13' 1", rigid: can be mounted on left or right, discharge height 9' 6", must be dismounted for transport, inc. spray system

• Side discharge conveyor belt cover (sheet metal) in connection with rigid side discharge conveyor

• Side discharge conveyor, hydraulically folding, can be mounted on both sides, discharge height 9' 6", remains on machine during transport, inc. spray system

• Climate packages: hot climate or cold climate package

• Ergonomic power pack enclosure for insulating noise sources

• Electromagnetic separator

• Belt scales, available for crusher discharge conveyor and fine grain conveyor (secondary screening unit)

• Trackpads for crawler chassis for protection of ground

• Premium lighting

• Air classifier for cleaning oversize grain from foreign matter and lightweight matter through 15 hp blower with air outlet under transfer conveyor. Only available in connection with secondary screening unit option.

Similar models may be shown in addition to the featured model. Equipment may be shown with options.

Specifications are subject to change without prior notice.