Skip Navigation.

JESCO

Kleemann MC 140 PRO

Mobile Jaw Crushers

How can we help?

(301) 874-5500

Properties

The MC 140 PRO specializes in high annual mining capacities and large feed sizes. This is helped by the solid double-deck prescreen, which is over three meters long, as well as the powerful diesel engine. The single toggle jaw crusher with its weight of over 50 tons can process feed sizes of up to 1300 x 1000 mm edge length and depending on the feed material reaches capacities of up to 750 t/h.

Frequency-controlled vibrating feeder
Independently vibrating double-deck prescreen
Possibility for external power supply (option)
Diesel-electric drive concept

Properties

Frequency-controlled vibrating feeder
Independently vibrating double-deck prescreen
Possibility for external power supply (option)
Diesel-electric drive concept

Specifications

CRUSHER - Crusher capacity:	268 hp
CRUSHER - Crusher drive type:	electric
CRUSHER - Crusher gap adjustment:	Hydraulically supported
CRUSHER - Crusher inlet (W x D):	1,400 mm x 1,130 mm
CRUSHER - Crusher inlet width:	55 in
CRUSHER - Crusher weight (approx.):	119,100 lbs
CRUSHER - Gap width max.:	10 in
CRUSHER - Gap width min.:	4.3 in
CRUSHER - Single toggle jaw crusher type:	STR140-103
CRUSHER DISCHARGE CONVEYOR - Crusher discharge conveyor length:	34 ft 1 in
CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:	14 ft 2 in
CRUSHER DISCHARGE CONVEYOR - Discharge height, extended, approx.:	12 ft 10 in
CRUSHER DISCHARGE CONVEYOR - Length, extended:	42 ft 8 in
CRUSHER DISCHARGE CONVEYOR - Width:	59 in
CRUSHING CAPACITY - Crushing capacity with CSS = 130 mm up to approx.:	375 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 160 mm up to approx.:	463 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 200 mm up to approx.:	573 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 250 mm up to approx.:	716 US t/hr
FEEDING UNIT - Feed height:	21 ft 4 in
FEEDING UNIT - Feed height with extension:	27 ft 9 in
FEEDING UNIT - Hopper length:	15 ft 1 in
FEEDING UNIT - Hopper length with extension:	18 ft 10 in
FEEDING UNIT - Hopper volume:	15.7 yd³
FEEDING UNIT - Hopper volume with extension:	45.8 yd³
FEEDING UNIT - Hopper width:	12 ft 2 in
FEEDING UNIT - Hopper width with extension:	18 ft 4 in
FEEDING UNIT - Max. feed size:	31 in x 50 in x 30 in
POWER SUPPLY UNIT - Drive concept:	Diesel-electric
POWER SUPPLY UNIT - Generator:	600 kVA
POWER SUPPLY UNIT - Power supply unit output:	587 hp - 587 hp
POWER SUPPLY UNIT - Rated speed:	1,500 rpm
PRIMARY SCREENING - Type:	Double-deck heavy-piece screen
PRIMARY SCREENING - Width x length:	55 in x 10 ft 6 in
SIDE DISCHARGE CONVEYOR - Discharge height:	13 ft 1 in
SIDE DISCHARGE CONVEYOR - Length:	26 ft 3 in
SIDE DISCHARGE CONVEYOR - Width:	39 in
TRANSPORT - Transport weight of basic plant:	352,800 lbs
VIBRATING EXTRACTOR - Width x length:	55 in x 8 ft 6 in
VIBRATING FEEDER - Width x length:	53 in x 13 ft 1 in

Continuous Feed System (CFS)

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.

Efficient and powerful diesel-electric drive (A) for low fuel consumption (crusher and all conveyor belts are driven electrically)

External power supply (B) for even more economic application in quarries

Specifications

CRUSHER - Crusher capacity:	268 hp
CRUSHER - Crusher drive type:	electric
CRUSHER - Crusher gap adjustment:	Hydraulically supported
CRUSHER - Crusher inlet (W x D):	1,400 mm x 1,130 mm
CRUSHER - Crusher inlet width:	55 in
CRUSHER - Crusher weight (approx.):	119,100 lbs
CRUSHER - Gap width max.:	10 in
CRUSHER - Gap width min.:	4.3 in
CRUSHER - Single toggle jaw crusher type:	STR140-103
CRUSHER DISCHARGE CONVEYOR - Crusher discharge conveyor length:	34 ft 1 in
CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:	14 ft 2 in
CRUSHER DISCHARGE CONVEYOR - Discharge height, extended, approx.:	12 ft 10 in
CRUSHER DISCHARGE CONVEYOR - Length, extended:	42 ft 8 in
CRUSHER DISCHARGE CONVEYOR - Width:	59 in
CRUSHING CAPACITY - Crushing capacity with CSS = 130 mm up to approx.:	375 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 160 mm up to approx.:	463 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 200 mm up to approx.:	573 US t/hr
CRUSHING CAPACITY - Crushing capacity with CSS = 250 mm up to approx.:	716 US t/hr
FEEDING UNIT - Feed height:	21 ft 4 in
FEEDING UNIT - Feed height with extension:	27 ft 9 in
FEEDING UNIT - Hopper length:	15 ft 1 in
FEEDING UNIT - Hopper length with extension:	18 ft 10 in
FEEDING UNIT - Hopper volume:	15.7 yd³
FEEDING UNIT - Hopper volume with extension:	45.8 yd³
FEEDING UNIT - Hopper width:	12 ft 2 in
FEEDING UNIT - Hopper width with extension:	18 ft 4 in
FEEDING UNIT - Max. feed size:	31 in x 50 in x 30 in
POWER SUPPLY UNIT - Drive concept:	Diesel-electric
POWER SUPPLY UNIT - Generator:	600 kVA
POWER SUPPLY UNIT - Power supply unit output:	587 hp - 587 hp
POWER SUPPLY UNIT - Rated speed:	1,500 rpm
PRIMARY SCREENING - Type:	Double-deck heavy-piece screen
PRIMARY SCREENING - Width x length:	55 in x 10 ft 6 in
SIDE DISCHARGE CONVEYOR - Discharge height:	13 ft 1 in
SIDE DISCHARGE CONVEYOR - Length:	26 ft 3 in
SIDE DISCHARGE CONVEYOR - Width:	39 in
TRANSPORT - Transport weight of basic plant:	352,800 lbs
VIBRATING EXTRACTOR - Width x length:	55 in x 8 ft 6 in
VIBRATING FEEDER - Width x length:	53 in x 13 ft 1 in

Downloads & Documentation
Links
- Downloads
Details

Continuous Feed System (CFS)

Uniform loading is indispensable for a good product, optimum throughput and low wear.

To ensure that the crushing chamber is always evenly filled, the Continuous Feed System (CFS) monitors the crusher level (jaw crusher and cone crusher) or the load at the rocker and rotor as well as the motor utilization (impact crusher).

Independently of this, the CFS regulates the frequency of the vibrating feeder and prescreen. A backlog on the prescreen is thus avoided and crusher utilization is optimized. When the crushing chamber is free again after overloading, material transport is continued without a delay.

The CFS facilitates the work of the operator because the machine automatically guarantees a homogeneous material flow, thus ensuring optimum loading of the crusher.

Jaw crusher

Jaw crushers operate according to the principle of pressure crushing. The crushed material is crushed in the wedge-shaped pit between the fixed crusher jaw and the crusher jaw articulated on an eccentric shaft. The material is crushed by the elliptic course of movement and falls down due to gravity. This occurs until the material is smaller than the set crushing gap.

Effective prescreening - better results and less wear

For effective prescreening of the feed material, the crushing plants are equipped with an independently vibrating double-deck prescreen. Wear in the crushing chamber is thus reduced by diverting the medium grain directly onto the vibrating extractor. The screen surfaces in the upper and lower deck can be changed easily and safely.

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

The crushing plants are equipped with efficient, powerful diesel-electric drives. They ensure environmentally friendly operation combined with low fuel consumption.

Efficient and powerful diesel-electric drive (A) for low fuel consumption (crusher and all conveyor belts are driven electrically)

External power supply (B) for even more economic application in quarries

Other Mobile Jaw Crushers Models

Request A Quote

First Name *

Last Name *

Phone Number *

Email *

Company

Address

City

State

Zip Code *

Location

Equipment Category

Specific Model

Comments

Contact

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location

Comments

Request a Part

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location

Vehicle

Make

Model

Year

Vin #

Miles

Other

Do you have a part number?

What kind of parts are needed?

Comments

Consignment

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State/Province

Zip Code *

Country

Product *

Serial Number of Equipment

Hours On Equipment

Comments

Request a Service

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location

Vehicle being serviced

Make

Model

Year

Vin #

Miles

Please describe your service needs.

What kind of service is being requested?

Appointment date preference.

Vehicle History

Have we serviced this vehicle before?

Last In Date

Please describe the work done.

Comments

Request A Rental

First Name *

Last Name *

Phone Number *

Email *

Zip Code*

Location

Equipment Category

Specific Model

Birth Date

License #

License Expiration Date

License State

Equipment Details

Model

Make

Pick Up Date

Drop Off Date

Comments

Simple Contact Form

First Name *

Last Name *

Please provide either a phone number OR an email

Phone Number *

Email *

Comments

Submit Application

First Name*

Last Name*

Email Address*

Phone Number*

Street

City

State

Zip Code*

Optional Message

Upload your resume

First Name *

Last Name *

Phone Number *

Email Address *

Location

Year *

Make *

Model *

Hours

Serial Number

Rate the Quality/Condition of Your Machine

Additional Specs/Description

New Purchase

Change Your Preferred Location

Fairfield, NJ

Lumberton, NJ | John Deere

South Plainfield, NJ

Deer Park, NY

Beacon, NY

Middletown, DE

Baltimore, MD

Frederick, MD

Delmar, MD

District Heights, MD

Waldorf, MD

Shrewsbury, MA

Lumberton, NJ | Ditch Witch & Topcon

JESCO

Kleemann MC 140 PRO

Mobile Jaw Crushers

How can we help?

Properties

Properties

Specifications

CRUSHER - Crusher capacity:

CRUSHER - Crusher drive type:

CRUSHER - Crusher gap adjustment:

CRUSHER - Crusher inlet (W x D):

CRUSHER - Crusher inlet width:

CRUSHER - Crusher weight (approx.):

CRUSHER - Gap width max.:

CRUSHER - Gap width min.:

CRUSHER - Single toggle jaw crusher type:

CRUSHER DISCHARGE CONVEYOR - Crusher discharge conveyor length:

CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:

CRUSHER DISCHARGE CONVEYOR - Discharge height, extended, approx.:

CRUSHER DISCHARGE CONVEYOR - Length, extended:

CRUSHER DISCHARGE CONVEYOR - Width:

CRUSHING CAPACITY - Crushing capacity with CSS = 130 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 160 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 200 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 250 mm up to approx.:

FEEDING UNIT - Feed height:

FEEDING UNIT - Feed height with extension:

FEEDING UNIT - Hopper length:

FEEDING UNIT - Hopper length with extension:

FEEDING UNIT - Hopper volume:

FEEDING UNIT - Hopper volume with extension:

FEEDING UNIT - Hopper width:

FEEDING UNIT - Hopper width with extension:

FEEDING UNIT - Max. feed size:

POWER SUPPLY UNIT - Drive concept:

POWER SUPPLY UNIT - Generator:

POWER SUPPLY UNIT - Power supply unit output:

POWER SUPPLY UNIT - Rated speed:

PRIMARY SCREENING - Type:

PRIMARY SCREENING - Width x length:

SIDE DISCHARGE CONVEYOR - Discharge height:

SIDE DISCHARGE CONVEYOR - Length:

SIDE DISCHARGE CONVEYOR - Width:

TRANSPORT - Transport weight of basic plant:

VIBRATING EXTRACTOR - Width x length:

VIBRATING FEEDER - Width x length:

Links

Continuous Feed System (CFS)

Jaw crusher

Effective prescreening - better results and less wear

Innovative diesel-electric drive concept - impressive performance with the best possible consumption values

Specifications

CRUSHER - Crusher capacity:

CRUSHER - Crusher drive type:

CRUSHER - Crusher gap adjustment:

CRUSHER - Crusher inlet (W x D):

CRUSHER - Crusher inlet width:

CRUSHER - Crusher weight (approx.):

CRUSHER - Gap width max.:

CRUSHER - Gap width min.:

CRUSHER - Single toggle jaw crusher type:

CRUSHER DISCHARGE CONVEYOR - Crusher discharge conveyor length:

CRUSHER DISCHARGE CONVEYOR - Discharge height approx.:

CRUSHER DISCHARGE CONVEYOR - Discharge height, extended, approx.:

CRUSHER DISCHARGE CONVEYOR - Length, extended:

CRUSHER DISCHARGE CONVEYOR - Width:

CRUSHING CAPACITY - Crushing capacity with CSS = 130 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 160 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 200 mm up to approx.:

CRUSHING CAPACITY - Crushing capacity with CSS = 250 mm up to approx.:

FEEDING UNIT - Feed height:

FEEDING UNIT - Feed height with extension:

FEEDING UNIT - Hopper length:

FEEDING UNIT - Hopper length with extension:

FEEDING UNIT - Hopper volume:

FEEDING UNIT - Hopper volume with extension:

FEEDING UNIT - Hopper width:

FEEDING UNIT - Hopper width with extension:

FEEDING UNIT - Max. feed size:

POWER SUPPLY UNIT - Drive concept: