Description

Models

Serviceability

Tilt up the hood for convenient ground-level access to dipsticks, fuel- and fluid-filler necks, and filters.

Cab & Controls

Large entryway, tightly sealed swing-out door, and ample foot- and legroom simplify getting in, getting comfortable, and getting things done.

Industry-exclusive three-way switchable controls and electrohydraulic (EH) joystick performance package for even more operating flexibility.

Anti-Vibration Undercarriage Option Now Available

Productivity
– The anti-vibration undercarriage system allows the machine to travel over rough terrain at higher travel speeds with better material retention while lowering operator fatigue.
– A new bogie system enables smoother transitions over uneven surfaces.

Uptime
– The anti-vibration undercarriage system only adds four new grease points to the maintenance checklist.
– Hydrostatic-drive hoses remain protected from external forces through an added steel shield.

Low Daily Operating Cost
– The Deere anti-vibration solution is rebuildable with low-cost rubber isolators with no special tools required.

Stability

Boom design keeps the load close to the machine for better stability. Low center of gravity, 35-degree bucket rollback, and optional ride control and self-leveling also helps keep buckets full and forks loaded.

Engine

- Turbocharged diesels meet rigid emission standards, run smooth, and pack plenty of power and torque.

- Unique Tri-Cool™ design resists debris buildup and employs large coolers for superior performance in severe, high-load conditions. Add a reversible fan for quick core cleanout in high-debris applications.

Productivity

Breakout force has increase a whopping 40 percent over our previous models.

Add the new 90-in. bucket, available for the 333G and watch productivity soar.

EH Boom Performance Package

Factory-installed performance package offers increased productivity and ease of use with the following capabilities:

• Return to Dig allows the operator to automatically set the bucket or other attachment to a designated ready-to-work position.

• Return to Carry allows the operator to use joystick detents to automatically reset the boom to a designated ready-to-carry position.

• Boom-Height Kick-Out allows the operator to pre-select a specific boom height based on truck/hopper height and use joystick detents to automatically stop at a specific height. 

• Electrohydraulic Self-Level allows the self-level to move the boom up and down unlike the hydraulic self-level option that works only on boom up.

Vertical Lift Boom

The vertical-lift boom offers more lift height and reach at the top of the lift path, for more stability and truck-loading ability.

Onboard Grade Indication Option

This option, installed in-factory or in the field, provides cross-slope or roll and mainfall slope or pitch of the machine within the in-cab monitor display.

• Easy-to-use
• Real-time interface
• Roll and pitch viewable as either “absolute” or “relative” values
• Roll and pitch viewable in either degrees or percent

Attachment-Ready

With the universal Quik-Tatch,™ you can go from compact loader bucket, to forks, to whatever, in just seconds. Each loader model delivers plenty of standard hydraulic power to operate augers, hydraulic hammers, roller levels, trenchers, or power rakes, to list just a few.

SmartGrade™ Option Now Available

Mastless
- No stakes or strings. No surveyors or checkers. No masts or cables. No overgrading and reworking.

DozerMode
- Push a button to switch the electrohydraulic (EH) control pattern for the CTL to function like a crawler dozer.

Quik-Tatch™
- Quickly change out attachments from dozer blade to scarifier or box blade.

EZGrade Software
- Automates machine to enable a smooth grade and reduce chop.

SG96 Dozer Blade
- Equipped with Deere-designed and built six-way power-angle-tilt (PAT) technology.

Uptime

Generous tank capacity and fuel-efficient diesels enable daylong operation, letting you accomplish more between fill-ups.

Specifications

• CAPACITIES - Fuel Tank, ltr (gallons (US)): 114 (30)
• DESCRIPTION - Lift Geometry: Vertical
• DIMENSIONS - Dump Angle, Degrees: 48
• DIMENSIONS - Dump Height - Maximum Foundry, mm (inches): 2690 (106.1)
• DIMENSIONS - Ground Clearance, mm (inches): 240 (9.4)
• DIMENSIONS - Height - Top Of Cab, mm (inches): 2200 (86.7)
• DIMENSIONS - Height to Hinge Pin, mm (inches): 3350 (132)
• DIMENSIONS - Length - Foundry Bucket, mm (inches): 3710 (146)
• DIMENSIONS - Length - No Bucket, mm (inches): 3100 (122)
• DIMENSIONS - Rear Departure Angle, Degrees: 31
• DIMENSIONS - Rollback - Ground Level, Degrees: 35
• DIMENSIONS - Width - No Bucket, mm (inches): 2050 (80.7)
• DRIVELINE - Aspiration: Turbo. Intercooled
• DRIVELINE - Displacement, ltr (Inches³): 3.1 (186.3)
• DRIVELINE - Emission Rating: Tier 4
• DRIVELINE - Engine Manufacturer : Yanmar
• DRIVELINE - Engine Model: 4TNV94FHT
• DRIVELINE - Engine Output - Gross, kW (hp): 74.6 (100)
• DRIVELINE - Engine Output - Net, kW (hp): 72 (96.6)
• DRIVELINE - Rated Speed, rpm: 2500
• DRIVELINE - Torque, Nm (lbf / ft): 395 (291.3)
• DRIVELINE - Track Shoe Width, mm (inches): 450 (17.7)
• PERFORMANCE - Breakout - Bucket Foundry, kN (lbf): 61.1 (13750)
• PERFORMANCE - Breakout - Lift Foundry, kN (lbf): 36.6 (8250)
• PERFORMANCE - Ground Bearing Pressure - Foundry, kPa (PSI): 34.1 (5)
• PERFORMANCE - Hydraulic Power - Option, kW (hp): 61.234 (82.1)
• PERFORMANCE - Hydraulic Power, kW (hp): 37.29 (50)
• PERFORMANCE - Pump Flow - Option, lt/min (gallons (US) / min): 156 (41.1)
• PERFORMANCE - Pump Flow, lt/min (gallons (US) / min): 95 (25)
• PERFORMANCE - Rated Operating Capacity - Foundry, kg (lbs): 1680 (3700)
• PERFORMANCE - Speed - Maximum, kph (mph): 12.6 (7.8)
• PERFORMANCE - System Pressure, bar (PSI): 237.87 (3450)
• PERFORMANCE - Tipping Load - Foundry, kg (lbs): 4799 (10570)
• WEIGHTS - Operating Weight - Foundry, kg (lbs): 5493 (12100)

Features

• NET HORSEPOWER: 72.0 kW (96.6 hp)
• GROSS HORSEPOWER: 74.6 kW (100 hp)
• LIFT HEIGHT: 3.35 m (132.0 in.)(11 ft. 0 in.)
• BUCKET BREAKOUT FORCE: 4200 kg (9,250 lb.)
• OPERATING WEIGHT: 5493 kg (12,100 lb.)
• RATED OPERATING CAPACITY: 1680 kg (3,700 lb.)

Copy Set