Ditch Witch AT60
| Make | Ditch Witch |
| Model | AT60 |
| Type | All Terrain |
How can we help?
Description
AT60 — DITCH WITCH ALL TERRAIN DIRECTIONAL DRILL
Rock-crushing power. Rock-solid reliability.
With the AT60 All Terrain, you also get a uniquely powerful combination of rotational torque, thrust and pullback, plus intuitive carve mode and many other features requested specifically by customers.
ALL TERRAIN
All Terrain technology enables enhanced rock drilling at a low fluid level, decreasing overall jobsite waste, minimizing cleanup and reducing environmental impact. The inner pipe works as a mechanical motor, driving the bit during the bore. The outer pipe thrusts the bit forward while steering the drill shaft. During backreaming, the outer pipe transmits full machine torque downhole.
POWER
200-gross-hp (149-KW) Tier 4 Cummins engine. 60,000 lb (267 kN) thrust and pullback with 9,000 ft lb (12240 N m) rotational torque – the powerful combination you need for outstanding productivity on big installation jobs.
PRODUCTIVITY
Heavy-duty, planetary-driven anchor system enables you to use full machine thrust when needed, improving jobsite productivity. Two-speed thrust drive motors provide exceptional low-speed drilling control as well as the ability to reach the high speeds necessary for rapidly loading drill pipes.
INNOVATIVE DESIGN
Dual rear independent stabilizers give you the confidence to set up on uneven terrain. Wireless operation system provides you remote control of ground drive, stabilizers, dual pivot and stake down functionality allowing for more efficient jobsite setup. Easy to service, with all daily maintenance points in one location that are easy accessed through removable doors.
OPERATOR’S STATION
Dual-pivot drill frame allows steep entry angles without raising the tracks off the ground. Operator’s station features an ergonomic seat, color LCD engine display, excellent visibility, and an intuitive joystick that controls all drilling functions. Open-top vise wrenches are angles toward the operator for an excellent view of the tool joint.
SUPERIOR CUSTOMER SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service and expert advice, our Ditch Witch dealer has it all for you.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- ALL TERRAIN PIPE (3.254) - Bend radius, min: 205 ft | 62.5 m
- ALL TERRAIN PIPE (3.254) - Diameter of drill pipe : 3.63 in | 92 mm
- ALL TERRAIN PIPE (3.254) - Diameter of drill pipe, tool joint end: 4.13 in | 105 mm
- ALL TERRAIN PIPE (3.254) - Length of drill pipe: 171 in | 4.34 m
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe: 268 lb | 122 kg
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & large box (18 pipe): 4,824 lb | 2187 kg
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & large box (24 pipe):
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & large box (35 pipe):
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & small box (12 pipe):
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & small box (20 pipe):
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe & small box (9 pipe): 2,412 lb | 1093 kg
- ALL TERRAIN PIPE (3.254) - Weight of drill pipe, lined :
- ALL TERRAIN PIPE COBBLE PIPE - Joint diameter:
- ALL TERRAIN PIPE COBBLE PIPE - Length of drill pipe, nominal:
- ALL TERRAIN PIPE COBBLE PIPE - Pipe diameter:
- ALL TERRAIN PIPE COBBLE PIPE - Weight of drill pipe & large box (35 pipe):
- ALL TERRAIN PIPE COBBLE PIPE - Weight of drill pipe & small box (20 pipe):
- ALL TERRAIN PIPE COBBLE PIPE - Weight of drill pipe w/inner rod:
- BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) : 950 amps
- BATTERY (2 USED) - SAE reserve capacity rating : 195 min
- BATTERY (TIER 4) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4) - SAE reserve capacity rating :
- BATTERY (TIER 4I) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4I) - SAE reserve capacity rating :
- DIMENSIONS - Angle of approach : 18°
- DIMENSIONS - Angle of approach, w/cab:
- DIMENSIONS - Angle of departure: 13°
- DIMENSIONS - Drill rack entry angle, max:
- DIMENSIONS - Drill rack entry angle, tracks on ground:
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
- DIMENSIONS - Entry angle: 10-16°
- DIMENSIONS - Ground clearance:
- DIMENSIONS - Height : 101 in | 2.57 m
- DIMENSIONS - Length : 331 in | 8.41 m
- DIMENSIONS - Length, mobiling:
- DIMENSIONS - Length, trailering:
- DIMENSIONS - Operating mass:
- DIMENSIONS - Operating mass w/o pipe:
- DIMENSIONS - Operating weight: 31,080 lb | 14098 kg
- DIMENSIONS - Transport height:
- DIMENSIONS - Transport height w/ cab:
- DIMENSIONS - Transport Length:
- DIMENSIONS - Weight w/ cab:
- DIMENSIONS - Weight w/ full rack:
- DIMENSIONS - Weight w/o pipe:
- DIMENSIONS - Width : 87 in | 2.21 m
- DIMENSIONS - Width w/ cab:
- DRILLING FULUID SYSTEM - Flow, max: 150 gpm | 560 l/min
- DRILLING FULUID SYSTEM - Pressure, max: 1,300 psi | 90 bar
- FLUID CAPACITIES (TIER 3) - Diesel exhaust fluid tank:
- FLUID CAPACITIES (TIER 3) - Drilling fluid for antifreeze tank :
- FLUID CAPACITIES (TIER 3) - Engine cooling system :
- FLUID CAPACITIES (TIER 3) - Engine lubrication oil w/filter :
- FLUID CAPACITIES (TIER 3) - Fuel tank :
- FLUID CAPACITIES (TIER 3) - Hydraulic reservoir :
- FLUID CAPACITIES (TIER 4) - Diesel exhaust fluid tank:
- FLUID CAPACITIES (TIER 4) - Drilling fluid for antifreeze tank :
- FLUID CAPACITIES (TIER 4) - Engine cooling system :
- FLUID CAPACITIES (TIER 4) - Engine lubrication oil w/filter :
- FLUID CAPACITIES (TIER 4) - Fuel tank :
- FLUID CAPACITIES (TIER 4) - Hydraulic reservoir :
- FLUID CAPACITIES - Antifreeze tank: 16 gal | 60 L
- FLUID CAPACITIES - DEF tank: 3.6 gal | 13.6 L
- FLUID CAPACITIES - Diesel exhaust fluid tank:
- FLUID CAPACITIES - Engine cooling system: 31 qt | 29 L
- FLUID CAPACITIES - Engine lubrication oil, w/filter: 19 qt | 18 L
- FLUID CAPACITIES - Fuel tank : 55 gal | 208 L
- FLUID CAPACITIES - Hydraulic reservoir : 36 gal | 136 L
- HIWS1 PIPE - Bend radius, min:
- HIWS1 PIPE - Diameter of drill pipe:
- HIWS1 PIPE - Diameter of drill pipe, tool joint end:
- HIWS1 PIPE - Length of dril pipe, nominal:
- HIWS1 PIPE - Weight of drill pipe:
- HIWS1 PIPE - Weight of drill pipe and large box (35 pipe):
- HIWS1 PIPE - Weight of drill pipe and small box (15 pipe):
- NOISE LEVEL - Exterior sound power:
- NOISE LEVEL - Exterior sound power per ISO 6393: < or = 106 dBA
- NOISE LEVEL - Operator sound pressure per ISO 6394: < or = 81 dBA
- OPERATION - Backreamer diameter: Soil dependent
- OPERATION - Bore diameter: 6.5 in | 165 mm
- OPERATION - Bore diameter (All Terrain w/Rockmaster™ 822):
- OPERATION - Bore diameter (All Terrain w/Rockmaster™ 86):
- OPERATION - Carriage pullback travel speed: 100 fpm | 30.5 m/min
- OPERATION - Carriage thrust travel speed: 100 fpm | 30.5 m/min
- OPERATION - Daily average fuel usage (per hour):
- OPERATION - Ground travel speed forward/reverse: 2.5 mph | 4 km/h
- OPERATION - Pullback force: 60,000 lb | 267 kN
- OPERATION - Spindle speed (AT inner spindle), max: 250 rpm
- OPERATION - Spindle speed, max: 240 rpm
- OPERATION - Spindle torque (AT inner spindle), max: 2,000 ft?lb | 2700 N?m
- OPERATION - Spindle torque, max: 9,000 ft?lb | 12200 N?m
- OPERATION - Thrust force: 60,000 lb | 267 kN
- POWER (TIER 3) - Aspiration:
- POWER (TIER 3) - Bore:
- POWER (TIER 3) - Cooling medium :
- POWER (TIER 3) - Displacement :
- POWER (TIER 3) - Emissions compliance Tier 3:
- POWER (TIER 3) - Engine :
- POWER (TIER 3) - Fuel :
- POWER (TIER 3) - Injection :
- POWER (TIER 3) - Manufacturer’s gross power rating :
- POWER (TIER 3) - Number of cylinders :
- POWER (TIER 3) - Peak gross power @ 2,000 rpm:
- POWER (TIER 3) - Rated speed :
- POWER (TIER 3) - Stroke :
- POWER (TIER 4) - Aspiration : Turbocharged & charge air cooled
- POWER (TIER 4) - Bore: 4.21 in | 107 mm
- POWER (TIER 4) - Cooling medium: Liquid
- POWER (TIER 4) - Displacement : 409 in3 | 6.7 L
- POWER (TIER 4) - Emissions compliance : EPA Tier 4 | EU Stage IV
- POWER (TIER 4) - Engine : CumminsQSB6.7
- POWER (TIER 4) - Estimated net power rating:
- POWER (TIER 4) - Fuel: Diesel
- POWER (TIER 4) - Injection: Direct
- POWER (TIER 4) - Manufacturer's gross power rating : 200 hp | 149 kW
- POWER (TIER 4) - Number of cylinders: 6
- POWER (TIER 4) - Rated speed: 2,200 rpm
- POWER (TIER 4) - Stroke : 4.88 in | 124 mm
- POWER (TIER 4I) - Aspiration :
- POWER (TIER 4I) - Bore:
- POWER (TIER 4I) - Cooling medium:
- POWER (TIER 4I) - Displacement :
- POWER (TIER 4I) - Emissions compliance :
- POWER (TIER 4I) - Engine :
- POWER (TIER 4I) - Fuel:
- POWER (TIER 4I) - Injection:
- POWER (TIER 4I) - Manufacturer's gross power rating :
- POWER (TIER 4I) - Number of cylinders:
- POWER (TIER 4I) - Rated speed:
- POWER (TIER 4I) - Stroke :
- POWER - Aspiration : Turbocharged & charge air cooled
- POWER - Bore: 4.21 in | 107 mm
- POWER - Cooling medium: Liquid
- POWER - Displacement : 408 in3 | 6.7 L
- POWER - Emissions compliance : EPA Tier 3 | EU Stage IIIA
- POWER - Engine : Cummins® QSB6.7
- POWER - Fuel: Diesel
- POWER - Injection: Direct
- POWER - Manufacturer's gross power rating : 190 hp | 142 kW
- POWER - Number of cylinders: 6
- POWER - Power bulge at 2,000 rpm:
- POWER - Rated speed: 2,200 rpm
- POWER - Stroke : 4.88 in | 124 mm
- POWER PIPE FORGED - Bend radius, min:
- POWER PIPE FORGED - Diameter of drill pipe :
- POWER PIPE FORGED - Diameter of drill pipe, tool joint end:
- POWER PIPE FORGED - Length of drill pipe, nominal :
- POWER PIPE FORGED - Weight of drill pipe:
- POWER PIPE FORGED - Weight of drill pipe & large box (28 pipe):
- POWER PIPE FORGED - Weight of drill pipe & small box (16 pipe):
- POWER PIPE FORGED FOR DIRT DRILLING - Bend radius, min:
- POWER PIPE FORGED FOR DIRT DRILLING - Joint diameter:
- POWER PIPE FORGED FOR DIRT DRILLING - Length:
- POWER PIPE FORGED FOR DIRT DRILLING - Pipe diameter:
- POWER PIPE FORGED FOR DIRT DRILLING - Weight of drill pipe:
- POWER PIPE FORGED FOR DIRT DRILLING - Weight of drill pipe and large box (28 pipe):
- POWER PIPE FORGED FOR DIRT DRILLING - Weight of drill pipe and small box (16 pipe):
- POWER PIPE® - Bend radius, min:
- POWER PIPE® - Diameter of drill pipe:
- POWER PIPE® - Diameter of drill pipe, tool joint end:
- POWER PIPE® - Joint diameter:
- POWER PIPE® - Length:
- POWER PIPE® - Length of drill pipe, nominal :
- POWER PIPE® - Pipe diameter :
- POWER PIPE® - Weight of drill pipe & large box (40 pipe):
- POWER PIPE® - Weight of drill pipe & large box (50 pipe):
- POWER PIPE® - Weight of drill pipe & small box (20 pipe):
- POWER PIPE® - Weight of drill pipe & small box (25 pipe):
- POWER PIPE® - Weight of drill pipe, lined:
- POWER PIPE® HD (2.464) - Bend radius, min: 170 ft | 52 m
- POWER PIPE® HD (2.464) - Diameter of drill pipe: 3.06 in | 78 mm
- POWER PIPE® HD (2.464) - Diameter of drill pipe, tool joint end: 3.5 in | 89 mm
- POWER PIPE® HD (2.464) - Joint diameter:
- POWER PIPE® HD (2.464) - Length of dril pipe, nominal:
- POWER PIPE® HD (2.464) - Length of drill pipe: 180 in | 4.57 m
- POWER PIPE® HD (2.464) - Weight of drill pipe & large box (48 pipe):
- POWER PIPE® HD (2.464) - Weight of drill pipe & small box (24 pipe):
- POWER PIPE® HD (2.464) - Weight of drill pipe and large box (28 pipe): 5,236 lb | 2375 kg
- POWER PIPE® HD (2.464) - Weight of drill pipe and large box (40 pipe):
- POWER PIPE® HD (2.464) - Weight of drill pipe and small box (16 pipe): 2,992 lb | 1357 kg
- POWER PIPE® HD (2.464) - Weight of drill pipe and small box (20 pipe):
- POWER PIPE® HD (2.464) - Weight of drill pipe, lined: 187 lb | 85 kg
- UFE DRILL PIPE - Bend radius, min :
- UFE DRILL PIPE - Diameter of drill pipe:
- UFE DRILL PIPE - Diameter of drill pipe, tool joint end :
- UFE DRILL PIPE - Length of drill pipe, nominal :
- UFE DRILL PIPE - Weight of drill pipe :
- VIBRATION LEVEL - Average vibration transmitted to the operator’s hand and whole body during normal operation does not exceed 2.5 and 0.5 m/sec2 respectively. :
- WEIGHT CONFIGURATION - Cab option:
- WEIGHT CONFIGURATION - Deduct Tier 3 engine option:
- WEIGHT CONFIGURATION - HD anchor option:
- WEIGHT CONFIGURATION - Standard anchor option:
