Ditch Witch AT32
| Make | Ditch Witch |
| Model | AT32 |
| Type | DW Directional Drills |
How can we help?
Description
AT32 ALL TERRAIN DIRECTIONAL DRILL
Bursting at the seams with power, the AT32 is the next generation of all-terrain drilling, packing performance and strength into a sleek package. Plus, operator-focused innovations allow for easier system operation and the ability to always finish the job—no matter what might stand in your way.
BIG ON ROCK PERFORMANCE. SMALL ON FOOTPRINT.
Bursting at the seams with power, the AT32 is the next generation of all-terrain drilling, packing performance and strength into a sleek package.
POWER
With a 155-hp Cummins B4.5 Stage V diesel engine, 32,000 lbs (141 kN) of thrust/pullback and 4,200 ft lbs (5694 N m) of rotational torque, let’s just say drill beats rock every time.
PRODUCTIVITY
The AT32 has increased drill pipe capacity, now allowing 450 ft (137.2m) of all-terrain pipe or 600 ft (182.9m) of dirt pipe with reversible pipe box onboard, increasing productivity.
OPERATOR’S STATION
Operator’s station actually built for HDD operators offers industry-leading visibility for the best view to all critical vision points-including ground entrance, wrenches, shuttle-retract location, and rear connection. Features the choice of a climate-controlled cab with tinted glass or an open operator’s station to meet each customer’s individual needs.
SUPERIOR CUSTOMER SUPPORT
As with all Ditch Witch equipment, the AT32 is backed by a worldwide network of dealerships you can count on for unmatched support and service. From genuine trained service and expert advice, your Ditch Witch dealership is your trusted partner.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- ALL TERRAIN PIPE - Bend radius, min: 130 ft | 39.6 m
- ALL TERRAIN PIPE - Joint diameter: 3.00 in | 76.2 mm
- ALL TERRAIN PIPE - Length: 120 in | 3.05 m
- ALL TERRAIN PIPE - Pipe diameter: 2.50 in | 63.5 mm
- ALL TERRAIN PIPE - Weight of drill pipe & small box (20 pipe): 2,740 lb | 1243 kg
- ALL TERRAIN PIPE - Weight of drill pipe, lined : 108 lb | 49.0 kg
- ALL TERRAIN PIPE - Weight w/drill pipe & large box (45 pipe): 5,430 lb | 2463 kg
- BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C): 950 amps
- BATTERY (2 USED) - SAE reserve capacity rating : 195 min
- DIMENSIONS - Entry angle, max: 9°-20°
- DIMENSIONS - Entry angle, tracks on ground: 9°-17° | 9°-17°
- DIMENSIONS - Ground clearance: 5.7 in | 144.8 mm
- DIMENSIONS - Length : 256.5 in | 6.5 m
- DIMENSIONS - Transport height w/ cab: 97 in | 2.5 m
- DIMENSIONS - Weight w/ cab: 19,220 lb | 8,718 kg
- DIMENSIONS - Weight w/open station: 18,530 lb | 8,405 kg
- DIMENSIONS - Width w/ cab: 89.3 in | 2.3 m
- DRILLING FULUID SYSTEM ON BOARD - Flow, max: 70 gpm | 265 l/min
- DRILLING FULUID SYSTEM ON BOARD - Pressure, max: 1,000 psi | 69 bar
- FLUID CAPACITIES - Fuel tank, Tier 4: 54 gal | 204 L
- FLUID CAPACITIES - Hydraulic reservoir : 17 gal | 64 L
- FORGED HDX - Bend radius, min: 123 ft | 37.5 m
- FORGED HDX - Joint diameter: 2.63 in | 67 mm
- FORGED HDX - Length: 118.1 in | 3.0 m
- FORGED HDX - Pipe diameter: 2.38 in | 60 mm
- FORGED HDX - Weight of drill pipe: 74 lb | 33.6 kg
- FORGED HDX - Weight w/drill pipe & large box (60 pipe): 5,260 lb | 2386 kg
- FORGED HDX - Weight w/drill pipe & small box (25 pipe): 2,549 lb | 1156 kg
- NOISE LEVEL - Exterior sound power per ISO 6395: < or = 96 dBA
- NOISE LEVEL - Operator sound pressure per ISO 6396 (w/ Cab): < or = 72 dBA
- OPERATION - Carriage pullback travel speed: 190 fpm | 58 m/min
- OPERATION - Carriage thrust travel speed: 190 fpm | 58 m/min
- OPERATION - Ground travel speed forward: 2.8 mph | 4.6 km/h
- OPERATION - Ground travel speed reverse: 2.8 mph | 4.6 km/h
- OPERATION - Pullback force: 32,000 lb | 142 kN
- OPERATION - Spindle speed (AT inner spindle), max: 280 rpm
- OPERATION - Spindle speed, max: 220 rpm
- OPERATION - Spindle torque (AT inner spindle), max: 1,200 ft lbs | 1627 N m
- OPERATION - Spindle torque, max: 4,200 ft lbs | 5694 N m
- OPERATION - Thrust force: 32,000 lb | 142 kN
- POWER - Aspiration : Turbocharged & charge air cooled
- POWER - Bore: 4.21 in | 107 mm
- POWER - Cooling medium: Liquid
- POWER - Displacement : 275 in³ | 4.5 L
- POWER - Emissions compliance : EPA Tier 4 | EU Stage V
- POWER - Engine : Cummins® 4.5
- POWER - Fuel: Diesel
- POWER - Injection: Direct
- POWER - Manufacturer's gross power rating : 155 hp | 115 kW
- POWER - Number of cylinders: 4
- POWER - Rated speed Tier 3/Tier 4: 2,200 rpm | 2,200 rpm
- POWER - Stroke : 4.88 in | 124 mm
- POWER PIPE® HD - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE® HD - Joint diameter: 2.75 in | 70 mm
- POWER PIPE® HD - Length: 118.1 in | 3 m
- POWER PIPE® HD - Pipe diameter: 2.38 in | 60 mm
- POWER PIPE® HD - Weight of drill pipe, lined: 84 lb | 38.1 kg
- POWER PIPE® HD - Weight of lined drill pipe & large box (60 pipe) : 5,860 lb | 2658 kg
- POWER PIPE® HD - Weight of lined drill pipe & small box (25 pipe) : 2,799 lb | 1270 kg
