Ditch Witch JT10
| Make | Ditch Witch |
| Model | JT10 |
| Type | DW Directional Drills |
How can we help?
Description
JT10 DIRECTIONAL DRILLS
The JT10 boasts unbeatable power in a compact, yet sturdy frame for easy transportation and improved maneuverability on tight jobsites
POWER
Powered by a Tier 4, 66-hp (49 kW) Deutz® diesel engine, the JT10 is the most powerful drill in its class. A Tier 4i option is available for less regulated countries.
COMFORTABLE OPERATOR’S STATION
A newly designed operator’s station features an ergonomic, traversing seat, positioning the operator near the center of the pipe rack for easy-to-reach pipe handing.
EASY MANEUVERABILITY
With the shortest profile in its class, the JT10 is easy to set up in tight spaces with rear ignition for faster setup.
INNOVATIVE DESIGN
The JT10 has the quickest cycle times in its drill class. The machine’s slow zone is shortened increasing cycle times and allowing operators to put more pipe in the ground faster.
MAXIMUM STRENGTH
For maximum strength and durability, the JT10 provides 1,100 ft·lb (2066.7 Nm) of rotational torque.
PRODUCTIVITY
The JT10 holds 324 ft (98.8 m) of drill pipe onboard to improve productivity and allow operators to finish virtually any utility installation job.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications
- BATTERY (TIER 4) - SAE cold crank rating @ 0°F (-18°C): 950 amps
- BATTERY (TIER 4) - SAE reserve capacity rating : 195 min
- BATTERY (TIER 4I) - SAE cold crank rating @ 0°F (-18°C): 875 amps
- BATTERY (TIER 4I) - SAE reserve capacity rating : 165 min
- DIMENSIONS - Angle of approach : 18°
- DIMENSIONS - Angle of departure: 18°
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4): 7,380 lb | 3,350 kg
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i): 7,100 lb | 3,220 kg
- DIMENSIONS - Entry angle: 10-14°
- DIMENSIONS - Height : 74 in | 1.9 m
- DIMENSIONS - Length : 146 in | 3.7 m
- DIMENSIONS - Operating mass:
- DIMENSIONS - Transport height:
- DIMENSIONS - Transport height w/ cab:
- DIMENSIONS - Transport Length:
- DIMENSIONS - Width : 48 in | 1.2 m
- DIMENSIONS - Width w/ cab:
- DRILLING FLUID SYSTEM (ON BOARD) - 16 gpm pump:
- DRILLING FLUID SYSTEM (ON BOARD) - 20 gpm pump:
- DRILLING FLUID SYSTEM (ON BOARD) - Flow, max: 20 gpm | 76 l/min
- DRILLING FLUID SYSTEM (ON BOARD) - Fluid tank capacity: 8 gal | 30.28 L
- DRILLING FLUID SYSTEM (ON BOARD) - Pressure, max: 1,200 psi | 83 bar
- FLUID CAPACITIES - Antifreeze tank:
- FLUID CAPACITIES - Diesel exhaust fluid tank:
- FLUID CAPACITIES - Engine cooling system:
- FLUID CAPACITIES - Engine oil w/filter:
- FLUID CAPACITIES - Fuel tank : 18 gal | 68 L
- FLUID CAPACITIES - Hydraulic reservoir : 23 gal | 87 L
- OPERATION - Backream diameter, soil dependent :
- OPERATION - Bore diameter: 3 in | 76 mm
- OPERATION - Carriage pullback travel speed:
- OPERATION - Carriage thrust travel speed:
- OPERATION - Ground travel speed forward: 2.3 mph | 3.7 km/hr
- OPERATION - Ground travel speed reverse: 1.5 mph | 2.4 km/hr
- OPERATION - Pullback force: 10,000 lb | 45 kN
- OPERATION - Spindle speed (AT inner spindle), max:
- OPERATION - Spindle speed, max: 186 rpm
- OPERATION - Spindle torque (AT inner spindle), max:
- OPERATION - Spindle torque, max: 1,100 ft·lb | 1491 N·m
- OPERATION - Thrust force: 9,000 lb | 40 kN
- POWER (TIER 4) - Aspiration : Turbocharged
- POWER (TIER 4) - Bore: 3.7 in | 95 mm
- POWER (TIER 4) - Cooling medium: Liquid
- POWER (TIER 4) - Displacement : 199 in³ | 3.3 L
- POWER (TIER 4) - Emissions compliance : EPA Tier 4 | EU Stage IIIB
- POWER (TIER 4) - Engine : Deutz TD2.9
- POWER (TIER 4) - Estimated net power rating:
- POWER (TIER 4) - Fuel: Diesel
- POWER (TIER 4) - Injection: Direct
- POWER (TIER 4) - Manufacturer's gross power rating : 66 hp | 49 kW
- POWER (TIER 4) - Number of cylinders: 4
- POWER (TIER 4) - Rated speed: 2,200 rpm
- POWER (TIER 4) - Stroke : 4.5 in | 115 mm
- POWER (TIER 4I) (LRC) - Aspiration : Natural
- POWER (TIER 4I) (LRC) - Bore: 3.7 in | 94 mm
- POWER (TIER 4I) (LRC) - Cooling medium: Integrated oil
- POWER (TIER 4I) (LRC) - Displacement : 189 in³ | 3.1 L
- POWER (TIER 4I) (LRC) - Emissions compliance : EPA Tier 4i | EU Stage IIIA
- POWER (TIER 4I) (LRC) - Engine : Deutz D2011L04i
- POWER (TIER 4I) (LRC) - Fuel: Diesel
- POWER (TIER 4I) (LRC) - Injection: Direct
- POWER (TIER 4I) (LRC) - Manufacturer's gross power rating : 53.5 hp | 39.9 kW
- POWER (TIER 4I) (LRC) - Number of cylinders: 4
- POWER (TIER 4I) (LRC) - Rated speed: 2,300 rpm
- POWER (TIER 4I) (LRC) - Stroke : 4.4 in | 112 mm
- POWER PIPE® HD - Bend radius, min: 82 ft | 25 m
- POWER PIPE® HD - Diameter of drill pipe: 1.6 in | 40 mm
- POWER PIPE® HD - Diameter of drill pipe, tool joint end: 2 in | 51 mm
- POWER PIPE® HD - Joint diameter:
- POWER PIPE® HD - Length:
- POWER PIPE® HD - Length of drill pipe, nominal : 72 in | 1.8 m
- POWER PIPE® HD - Pipe diameter:
- POWER PIPE® HD - Weight of drill pipe & large box (50 pipe):
- POWER PIPE® HD - Weight of drill pipe & small box (25 pipe):
- POWER PIPE® HD - Weight of drill pipe, lined: 29 lb | 13 kg
