Ditch Witch JT25
| Make | Ditch Witch |
| Model | JT25 |
| Type | DW Directional Drills |
How can we help?
Description
JT25 — DITCH WITCH DIRECTIONAL DRILL — More than a Drill. It's your new Workhorse.
Powerful, productive, and specifically designed for the utility contractor, the JT25 is one of the quietest and most stable mid-size drills on the market.
POWER
• 27,000 lb (120 kN) of thrust and pullback provides the power to efficiently get the job done and move on to the next.
• 130-hp (97-kW) Tier 4 Cummins® diesel engine is not only the most powerful in its class, but also the quietest, for greater operator comfort.
• Exclusive rotational drive with 4,000 ft·lb (5420 N·m) of torque; unique, single-motor system results in smoother operation and greater uptime.
PRODUCTIVITY
• Exceptionally productive drill for installing utility pipe and cables of up to 12 inches (30 cm) in diameter at lengths of up to 500 feet (152 m).
• Narrower operational width than competitors’ models, for greater maneuverability and productivity in tight spaces.
• Intuitive, easy-to-use carve mode simplifies operation and improves productivity.
INNOVATIVE DESIGN
• Dual rear independent stabilizers are easy to set up and enhance stability makes JT25 the most stable mid-size drill across all terrains.
• Dual-pivot drill frame allows steeper entry angles without raising tracks off the ground.
• Daily maintenance points in one easy-to-access location, and no grease zerks, minimizing upkeep and downtime.
OPERATOR'S STATION
• Comfortable operator's station with your choice of a single handled control or dual joysticks for thrust and rotation control, minimizing training time.
• Excellent view of the tool joint when making up and breaking out pipe. Open-top vise wrenches are angled toward the operator.
• LCD display provides engine diagnostics and informational messages.
SUPERIOR CUSTOMER SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- BATTERY (TIER 4) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4) - SAE reserve capacity rating :
- BATTERY (TIER 4I) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4I) - SAE reserve capacity rating :
- BATTERY - SAE cold crank rating @ 0°F (-18°C) : 950 amps
- BATTERY - SAE reserve capacity rating : 195 min
- DIMENSIONS (*FULL RACK, 55 PIPE) - Angle of approach :
- DIMENSIONS (*FULL RACK, 55 PIPE) - Angle of approach, w/cab:
- DIMENSIONS (*FULL RACK, 55 PIPE) - Angle of departure:
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drill rack entry angle, max: 9-20°
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drill rack entry angle, tracks on ground: 9-17°
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
- DIMENSIONS (*FULL RACK, 55 PIPE) - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
- DIMENSIONS (*FULL RACK, 55 PIPE) - Entry angle:
- DIMENSIONS (*FULL RACK, 55 PIPE) - Ground clearance: 5.7 in | 145 mm
- DIMENSIONS (*FULL RACK, 55 PIPE) - Height :
- DIMENSIONS (*FULL RACK, 55 PIPE) - Length :
- DIMENSIONS (*FULL RACK, 55 PIPE) - Operating mass:
- DIMENSIONS (*FULL RACK, 55 PIPE) - Transport height: 93 in | 2.36 m
- DIMENSIONS (*FULL RACK, 55 PIPE) - Transport height w/ cab: 99.5 in | 2.53 m
- DIMENSIONS (*FULL RACK, 55 PIPE) - Transport Length: 232.5 in | 5.90 m
- DIMENSIONS (*FULL RACK, 55 PIPE) - Weight: 20,760 lb | 9417 kg
- DIMENSIONS (*FULL RACK, 55 PIPE) - Weight w/ cab: 21,360 lb | 9689 kg
- DIMENSIONS (*FULL RACK, 55 PIPE) - Weight w/ full rack:
- DIMENSIONS (*FULL RACK, 55 PIPE) - Width : 87 in | 2.21 m
- DIMENSIONS (*FULL RACK, 55 PIPE) - Width w/ cab: 87 in | 2.21 m
- DRILL PIPE - Bend radius, min:
- DRILL PIPE - Diameter of drill pipe:
- DRILL PIPE - Diameter of drill pipe, tool joint end:
- DRILL PIPE - Length of drill pipe, nominal:
- DRILL PIPE - Weight of drill pipe:
- DRILL PIPE - Weight of drill pipe & box (12 pipe):
- DRILLING FLUID SYSTEM ON BOARD - Flow, max: 50 gpm | 189 l/min
- DRILLING FLUID SYSTEM ON BOARD - Pressure, max: 1,200 psi | 83 bar
- FLUID CAPACITIES - Diesel exhaust fluid tank: 5 gal | 18.9 L
- FLUID CAPACITIES - Drilling fluid for antifreeze tank : 8 gal | 30 L
- FLUID CAPACITIES - Engine cooling system : 24 qt | 22.7 L
- FLUID CAPACITIES - Engine lubrication oil w/filter : 13.7 qt | 13 L
- FLUID CAPACITIES - Fuel tank : 48 gal | 182 L
- FLUID CAPACITIES - Hydraulic reservoir : 27 gal | 102 L
- FLUID CAPACITIES (TIER 3) - Diesel exhaust fluid tank:
- FLUID CAPACITIES (TIER 3) - Drilling fluid for antifreeze tank :
- FLUID CAPACITIES (TIER 3) - Engine cooling system :
- FLUID CAPACITIES (TIER 3) - Engine lubrication oil w/filter :
- FLUID CAPACITIES (TIER 3) - Fuel tank :
- FLUID CAPACITIES (TIER 3) - Hydraulic reservoir :
- FLUID CAPACITIES - Antifreeze tank:
- FLUID CAPACITIES - Diesel exhaust fluid tank:
- FLUID CAPACITIES - Engine cooling system:
- FLUID CAPACITIES - Engine oil w/filter:
- FLUID CAPACITIES - Fuel tank :
- FLUID CAPACITIES - Hydraulic reservoir :
- HIWS1 PIPE - Bend radius, min:
- HIWS1 PIPE - Diameter of drill pipe:
- HIWS1 PIPE - Diameter of drill pipe, tool joint end:
- HIWS1 PIPE - Length of dril pipe, nominal:
- HIWS1 PIPE - Weight of drill pipe:
- HIWS1 PIPE - Weight of drill pipe and large box (35 pipe):
- HIWS1 PIPE - Weight of drill pipe and small box (15 pipe):
- NOISE LEVEL - Exterior sound power: 104 dBA
- NOISE LEVEL - Operator sound: 86 dBA
- NOISE LEVEL - Operator sound w/cab: 80 dBA
- OPERATION - Backream diameter, soil dependent :
- OPERATION - Bore diameter:
- OPERATION - Carriage pullback travel speed: 190 fpm | 58 m/min
- OPERATION - Carriage thrust travel speed: 182 fpm | 55 m/min
- OPERATION - Daily average fuel usage (per hour):
- OPERATION - Ground travel speed forward/reverse: 2.8 mph | 4.6 km/h / 2.8 mph | 4.6 km/h
- OPERATION - Pullback force: 27,000 lb | 120 kN
- OPERATION - Spindle speed (AT inner spindle), max:
- OPERATION - Spindle speed, max: 220 rpm
- OPERATION - Spindle torque (AT inner spindle), max:
- OPERATION - Spindle torque, max: 4,000 ft·lb | 5420 N·m
- OPERATION - Thrust force: 27,000 lb | 120 kN
- POWER (TIER 3) - Aspiration: Turbocharged and charge air cooled
- POWER (TIER 3) - Bore: 4.21 in | 107 mm
- POWER (TIER 3) - Cooling medium : Liquid
- POWER (TIER 3) - Displacement : 275 in³ | 4.5 L
- POWER (TIER 3) - Emissions compliance Tier 3: EPA Tier 3 / EU Stage IIIA
- POWER (TIER 3) - Emissions compliance Tier 4: EPA Tier 4 / EU Stage IV
- POWER (TIER 3) - Engine : Cummins® QSB4.5
- POWER (TIER 3) - Fuel : Diesel
- POWER (TIER 3) - Injection : Direct
- POWER (TIER 3) - Manufacturer’s gross power rating : 130 hp | 97 kW
- POWER (TIER 3) - Number of cylinders : 4
- POWER (TIER 3) - Rated speed : 2,500 rpm
- POWER (TIER 3) - Stroke : 4.88 in | 124 mm
- POWER (TIER 4) - Aspiration :
- POWER (TIER 4) - Bore:
- POWER (TIER 4) - Cooling medium:
- POWER (TIER 4) - Displacement :
- POWER (TIER 4) - Emissions compliance :
- POWER (TIER 4) - Engine :
- POWER (TIER 4) - Estimated net power rating:
- POWER (TIER 4) - Fuel:
- POWER (TIER 4) - Injection:
- POWER (TIER 4) - Manufacturer's gross power rating :
- POWER (TIER 4) - Number of cylinders:
- POWER (TIER 4) - Rated speed:
- POWER (TIER 4) - Stroke :
- POWER (TIER 4I) - Aspiration :
- POWER (TIER 4I) - Bore:
- POWER (TIER 4I) - Cooling medium:
- POWER (TIER 4I) - Displacement :
- POWER (TIER 4I) - Emissions compliance :
- POWER (TIER 4I) - Engine :
- POWER (TIER 4I) - Fuel:
- POWER (TIER 4I) - Injection:
- POWER (TIER 4I) - Manufacturer's gross power rating :
- POWER (TIER 4I) - Number of cylinders:
- POWER (TIER 4I) - Rated speed:
- POWER (TIER 4I) - Stroke :
- POWER - Aspiration :
- POWER - Bore:
- POWER - Cooling medium:
- POWER - Displacement :
- POWER - Emissions compliance :
- POWER - Engine :
- POWER - Fuel:
- POWER - Injection:
- POWER - Manufacturer's gross power rating :
- POWER - Number of cylinders:
- POWER - Rated speed:
- POWER - Stroke :
- POWER PIPE FORGED HD - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE FORGED HD - Joint diameter: 2.75 in | 70 mm
- POWER PIPE FORGED HD - Length: 120 in | 3.05 m
- POWER PIPE FORGED HD - Pipe diameter: 2.38 in | 60 mm
- POWER PIPE FORGED HD - Weight of drill pipe and large box (55 pipe): 4,522 lb | 2187 kg
- POWER PIPE FORGED HD - Weight of drill pipe and small box (25 pipe): 2,395 lb | 1086 kg
- POWER PIPE FORGED HD - Weight of drill pipe, forged: 73 lb | 33 kg
- POWER PIPE FORGED HDX - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE FORGED HDX - Joint diameter: 2.63 in | 66.7 mm
- POWER PIPE FORGED HDX - Length: 120 in | 3.05 m
- POWER PIPE FORGED HDX - Pipe diameter: 2.38 in | 60 mm
- POWER PIPE FORGED HDX - Weight of drill pipe and large box (55 pipe): 4,522 lb | 2187 kg
- POWER PIPE FORGED HDX - Weight of drill pipe and small box (25 pipe): 2,395 lb | 1086 kg
- POWER PIPE FORGED HDX - Weight of drill pipe, forged: 73 lb | 33 kg
- POWER PIPE® HD - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE® HD - Diameter of drill pipe:
- POWER PIPE® HD - Diameter of drill pipe, tool joint end:
- POWER PIPE® HD - Joint diameter: 2.75 in | 70 mm
- POWER PIPE® HD - Length: 118 in | 3 m
- POWER PIPE® HD - Length of dril pipe, nominal:
- POWER PIPE® HD - Length of drill pipe, nominal :
- POWER PIPE® HD - Pipe diameter : 2.38 in | 60 mm
- POWER PIPE® HD - Pipe diameter:
- POWER PIPE® HD - Weight of drill pipe & large box (48 pipe):
- POWER PIPE® HD - Weight of drill pipe & large box (50 pipe): 5,647 lb | 2562 kg
- POWER PIPE® HD - Weight of drill pipe & small box (24 pipe):
- POWER PIPE® HD - Weight of drill pipe & small box (25 pipe): 2,770 lb | 1,154 kg
- POWER PIPE® HD - Weight of drill pipe and large box (28 pipe):
- POWER PIPE® HD - Weight of drill pipe and large box (40 pipe):
- POWER PIPE® HD - Weight of drill pipe and small box (16 pipe):
- POWER PIPE® HD - Weight of drill pipe and small box (20 pipe):
- POWER PIPE® HD - Weight of drill pipe, lined: 88 lb | 40 kg
- SINGLE PIECE FORGED DRILL PIPE - Bend radius, min:
- SINGLE PIECE FORGED DRILL PIPE - Joint diameter:
- SINGLE PIECE FORGED DRILL PIPE - Length:
- SINGLE PIECE FORGED DRILL PIPE - Pipe diameter:
- SINGLE PIECE FORGED DRILL PIPE - Weight per drill pipe, forged:
- SINGLE PIECE FORGED DRILL PIPE - Weight w/drill pipe & large box (50 pipe):
- SINGLE PIECE FORGED DRILL PIPE - Weight w/drill pipe & small box (25 pipe):
- UFE DRILL PIPE - Bend radius, min :
- UFE DRILL PIPE - Diameter of drill pipe:
- UFE DRILL PIPE - Diameter of drill pipe, tool joint end :
- UFE DRILL PIPE - Length of drill pipe, nominal :
- UFE DRILL PIPE - Weight of drill pipe :
- VIBRATION LEVEL - Average vibration transmitted to the operator's hand and whole body during normal operation:
- WEIGHT CONFIGURATION - Cab option:
- WEIGHT CONFIGURATION - DisplDeduct Tier 3 engine optionay:
- WEIGHT CONFIGURATION - HD anchor option:
- WEIGHT CONFIGURATION - Standard anchor option:
