Ditch Witch JT28
| Make | Ditch Witch |
| Model | JT28 |
| Type | DW Directional Drills |
How can we help?
Description
JT28 DIRECTIONAL DRILL — Performance in full view
More than just brute force, the JT28 puts the operator first. Built from direct customer feedback, the JT28 features best-in-class comfort, premier LCD display and a superior view of all machine functions – giving you a new outlook on what productivity truly is.
POWER
A 130-hp (97-kW) Tier 4 Cummins diesel engine is the most power in its class. 28,000 lb. (124.6 kN) of thrust and pullback provides the power to efficiently get the job done and move on to the next. An exclusive rotational drive with 4,200 ft-lb (5694 n-m) of torque and a unique, single-motor system results in smoother operation.
PRODUCTIVITY
Narrower operational width provides greater maneuverability and productivity in tight spaces. Intuitive, easy-to-use carve mode simplifies operation and improves productivity, making it exceptionally easy to install pipe and cables of up to 12 inches (30 cm) in diameter at length of up to 500 feet (152 m).
INNOVATIVE DESIGN
Simple, field-proven pipe loading system with a lower center of gravity helps increase stability. Dual-pivot drill frame allows for steeper entry angles without raising tracks off the ground. No grease zerks and all daily maintenance points are in an easy-to-access location minimizing upkeep and maximizing uptime.
SERVICEABILITY
A comfortable operator’s station built from direct customer feedback offers you the choice of single-handed control or dual joysticks for more thrust and rotational control, minimizing training time. Open-top vise wrenches are angled toward the operator, helping provide an excellent view of the tool joint when making up and breaking out pipe. LCD display provides engine diagnostics and informational messages directly to you.
SUPERIOR CUSTOMER SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) : 950 amps
- BATTERY (2 USED) - SAE reserve capacity rating : 195 min
- BATTERY (TIER 4) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4) - SAE reserve capacity rating :
- BATTERY (TIER 4I) - SAE cold crank rating @ 0°F (-18°C):
- BATTERY (TIER 4I) - SAE reserve capacity rating :
- DIMENSIONS - Angle of approach :
- DIMENSIONS - Angle of approach, w/cab:
- DIMENSIONS - Angle of departure:
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
- DIMENSIONS - Entry angle:
- DIMENSIONS - Entry angle, max: 9-20°
- DIMENSIONS - Entry angle, tracks on ground: 9-17°
- DIMENSIONS - Ground clearance: 5.7 in | 145 mm
- DIMENSIONS - Height :
- DIMENSIONS - Length :
- DIMENSIONS - Operating mass:
- DIMENSIONS - Transport height:
- DIMENSIONS - Transport height w/ cab: 99.5 in | 2.53 m
- DIMENSIONS - Transport Length: 232.5 in | 5.90 m
- DIMENSIONS - Weight:
- DIMENSIONS - Weight w/ cab: 21,360 lb | 9689 kg
- DIMENSIONS - Weight w/ full rack:
- DIMENSIONS - Width :
- DIMENSIONS - Width w/ cab: 87 in | 2.2 m
- DITCH WITCH FORGED HDX - Bend radius, min: 123 ft | 37.5 m
- DITCH WITCH FORGED HDX - Joint diameter: 2.63 in | 67 mm
- DITCH WITCH FORGED HDX - Length : 120 in | 3.05 m
- DITCH WITCH FORGED HDX - Pipe diameter: 2.38 in | 60 mm
- DITCH WITCH FORGED HDX - Weight of drill pipe, lined : 74 lb | 33.6 kg
- DITCH WITCH FORGED HDX - Weight of lined drill pipe & large box (55 pipe): 4,877 lb | 2212 kg
- DITCH WITCH FORGED HDX - Weight of lined drill pipe & small box (25 pipe) : 2,420 lb 1098 kg
- DRILLING FULUID SYSTEM ON BOARD - Flow, max: 50 gpm | 189 L/min
- DRILLING FULUID SYSTEM ON BOARD - Pressure, max: 1,200 psi | 83 bar
- FLUID CAPACITIES (TIER 3) - Diesel exhaust fluid tank:
- FLUID CAPACITIES (TIER 3) - Drilling fluid for antifreeze tank :
- FLUID CAPACITIES (TIER 3) - Engine cooling system :
- FLUID CAPACITIES (TIER 3) - Engine lubrication oil w/filter :
- FLUID CAPACITIES (TIER 3) - Fuel tank :
- FLUID CAPACITIES (TIER 3) - Hydraulic reservoir :
- FLUID CAPACITIES (TIER 4) - Diesel exhaust fluid tank:
- FLUID CAPACITIES (TIER 4) - Drilling fluid for antifreeze tank :
- FLUID CAPACITIES (TIER 4) - Engine cooling system :
- FLUID CAPACITIES (TIER 4) - Engine lubrication oil w/filter :
- FLUID CAPACITIES (TIER 4) - Fuel tank :
- FLUID CAPACITIES (TIER 4) - Hydraulic reservoir :
- FLUID CAPACITIES - Antifreeze tank:
- FLUID CAPACITIES - Diesel exhaust fluid tank:
- FLUID CAPACITIES - Engine cooling system:
- FLUID CAPACITIES - Engine oil w/filter:
- FLUID CAPACITIES - Fuel tank, Tier 3: 56 gal | 212 L
- FLUID CAPACITIES - Fuel tank, Tier 4: 48 gal | 182 L
- FLUID CAPACITIES - Hydraulic reservoir : 27 gal | 102 L
- HIWS1 PIPE - Bend radius, min:
- HIWS1 PIPE - Diameter of drill pipe:
- HIWS1 PIPE - Diameter of drill pipe, tool joint end:
- HIWS1 PIPE - Length of dril pipe, nominal:
- HIWS1 PIPE - Weight of drill pipe:
- HIWS1 PIPE - Weight of drill pipe and large box (35 pipe):
- HIWS1 PIPE - Weight of drill pipe and small box (15 pipe):
- NOISE LEVEL - Exterior sound power: 104 dBA
- NOISE LEVEL - Operator sound: 86 dBA
- NOISE LEVEL - Operator sound w/cab: 80 dBA
- OPERATION - Backream diameter, soil dependent :
- OPERATION - Bore diameter:
- OPERATION - Carriage pullback travel speed: 190 fpm | 58 m/min
- OPERATION - Carriage thrust travel speed: 182 fpm | 55 m/min
- OPERATION - Daily average fuel usage (per hour):
- OPERATION - Ground travel speed forward/reverse: 2.8 mph | 4.6 km/h / 2.8 mph 4.6 km/h
- OPERATION - Pullback force: 28,000 lb | 124 kN
- OPERATION - Spindle speed (AT inner spindle), max:
- OPERATION - Spindle speed, max: 220 rpm
- OPERATION - Spindle torque (AT inner spindle), max:
- OPERATION - Spindle torque, max: 4,200 ft·lb | 5690 N·m
- OPERATION - Thrust force: 28,000 lb | 124 kN
- POWER (TIER 3) - Aspiration:
- POWER (TIER 3) - Bore:
- POWER (TIER 3) - Cooling medium :
- POWER (TIER 3) - Displacement :
- POWER (TIER 3) - Emissions compliance Tier 3:
- POWER (TIER 3) - Engine :
- POWER (TIER 3) - Fuel :
- POWER (TIER 3) - Injection :
- POWER (TIER 3) - Manufacturer’s gross power rating :
- POWER (TIER 3) - Number of cylinders :
- POWER (TIER 3) - Rated speed :
- POWER (TIER 3) - Stroke :
- POWER (TIER 4) - Aspiration :
- POWER (TIER 4) - Bore:
- POWER (TIER 4) - Cooling medium:
- POWER (TIER 4) - Displacement :
- POWER (TIER 4) - Emissions compliance :
- POWER (TIER 4) - Engine :
- POWER (TIER 4) - Estimated net power rating:
- POWER (TIER 4) - Fuel:
- POWER (TIER 4) - Injection:
- POWER (TIER 4) - Manufacturer's gross power rating :
- POWER (TIER 4) - Number of cylinders:
- POWER (TIER 4) - Rated speed:
- POWER (TIER 4) - Stroke :
- POWER (TIER 4I) - Aspiration :
- POWER (TIER 4I) - Bore:
- POWER (TIER 4I) - Cooling medium:
- POWER (TIER 4I) - Displacement :
- POWER (TIER 4I) - Emissions compliance :
- POWER (TIER 4I) - Engine :
- POWER (TIER 4I) - Fuel:
- POWER (TIER 4I) - Injection:
- POWER (TIER 4I) - Manufacturer's gross power rating :
- POWER (TIER 4I) - Number of cylinders:
- POWER (TIER 4I) - Rated speed:
- POWER (TIER 4I) - Stroke :
- POWER - Aspiration : Turbocharged & charge air cooled
- POWER - Bore: 4.21 in | 107 mm
- POWER - Cooling medium: Liquid
- POWER - Displacement : 275 in3 | 4.5 L
- POWER - Emissions compliance Tier 4 : EPA Tier 4 | EU Stage IV
- POWER - Emissons compliance Tier 3 : EPA Tier 3 | EU Stage IIIA
- POWER - Engine : Cummins® QSB4.5
- POWER - Fuel: Diesel
- POWER - Injection: Direct
- POWER - Manufacturer's gross power rating : 130 hp | 97 kW
- POWER - Number of cylinders: 4
- POWER - Rated speed Tier 3/Tier 4: 2,500 rpm
- POWER - Stroke : 4.88 in | 124 mm
- POWER PIPE FORGED HD - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE FORGED HD - Joint diameter: 2.75 in | 70 mm
- POWER PIPE FORGED HD - Length: 118 in | 3 m
- POWER PIPE FORGED HD - Pipe diameter: 2.38 in | 60 mm
- POWER PIPE FORGED HD - Weight of drill pipe, lined : 76 lb | 34.5 kg
- POWER PIPE FORGED HD - Weight of lined drill pipe & large box (55 pipe): 4,987 lb | 2262 kg
- POWER PIPE FORGED HD - Weight of lined drill pipe & small box (25 pipe) : 2,470 lb | 1120 kg
- POWER PIPE® - Bend radius, min:
- POWER PIPE® - Diameter of drill pipe:
- POWER PIPE® - Diameter of drill pipe, tool joint end:
- POWER PIPE® - Joint diameter:
- POWER PIPE® - Length:
- POWER PIPE® - Length of drill pipe, nominal :
- POWER PIPE® - Pipe diameter :
- POWER PIPE® - Weight of drill pipe & large box (50 pipe):
- POWER PIPE® - Weight of drill pipe & small box (25 pipe):
- POWER PIPE® - Weight of drill pipe, lined:
- POWER PIPE® HD - Bend radius, min: 123 ft | 37.5 m
- POWER PIPE® HD - Diameter of drill pipe, tool joint end:
- POWER PIPE® HD - Joint diameter: 2.75 in | 70 mm
- POWER PIPE® HD - Length: 118 in | 3 m
- POWER PIPE® HD - Length of dril pipe, nominal:
- POWER PIPE® HD - Pipe diameter: 2.38 in | 60 mm
- POWER PIPE® HD - Weight of drill pipe & large box (48 pipe):
- POWER PIPE® HD - Weight of drill pipe & small box (24 pipe):
- POWER PIPE® HD - Weight of drill pipe and large box (40 pipe):
- POWER PIPE® HD - Weight of drill pipe and small box (20 pipe):
- POWER PIPE® HD - Weight of drill pipe, lined: 88 lb | 40 kg
- POWER PIPE® HD - Weight of lined drill pipe & large box (55 pipe) : 5,647 lb | 2562 kg
- POWER PIPE® HD - Weight of lined drill pipe & small box (25 pipe): 2,770 lb | 1257 kg
- SINGLE PIECE FORGED DRILL PIPE - Bend radius, min:
- SINGLE PIECE FORGED DRILL PIPE - Joint diameter:
- SINGLE PIECE FORGED DRILL PIPE - Length:
- SINGLE PIECE FORGED DRILL PIPE - Pipe diameter:
- SINGLE PIECE FORGED DRILL PIPE - Weight per drill pipe, forged:
- SINGLE PIECE FORGED DRILL PIPE - Weight w/drill pipe & large box (50 pipe):
- SINGLE PIECE FORGED DRILL PIPE - Weight w/drill pipe & small box (25 pipe):
- UFE DRILL PIPE - Bend radius, min :
- UFE DRILL PIPE - Diameter of drill pipe:
- UFE DRILL PIPE - Diameter of drill pipe, tool joint end :
- UFE DRILL PIPE - Length of drill pipe, nominal :
- UFE DRILL PIPE - Weight of drill pipe :
- VIBRATION LEVEL - Average vibration transmitted to the operator's hand and whole body during normal operation:
- WEIGHT CONFIGURATION - Cab option:
- WEIGHT CONFIGURATION - DisplDeduct Tier 3 engine optionay:
- WEIGHT CONFIGURATION - HD anchor option:
- WEIGHT CONFIGURATION - Standard anchor option:
