Ditch Witch JT5
| Make | Ditch Witch |
| Model | JT5 |
| Type | DW Directional Drills |
How can we help?
Description
JT5 HORIZONTAL DIRECTIONAL DRILLS
Experience built the Ditch Witch® JT5 Horizontal Directional Drill. With input from our customers JT5 and their many years of experience installing utilities on tight jobsites, our engineers developed the ideal compact rig with the right amount of thrust and pullback for shallow installations of cable, fiber and water systems up to 150 feet in length (46 m) beneath roads, driveways, sidewalks, sensitive landscaping, and other surface obstacles. The JT5 is a true team effort.
FEATURES
• Compact and maneuverable JT5 fits through a 36-inch (910-mm) yard gate; at 120 inches (3.1 m) long, it can be set up on the street with minimal traffic disruption.
• Ergonomic operator’s station features a stationary seat, automatic fluid shutoff control and easy visibility of the remote display.
• Specially designed drill pipe has aggressive bend radius so you can successfully install utilities around structures.
• Convenient, electrically operated lubrication system helps maximize the life of pipe joints and increase productivity.
• Heavy-duty anchor system keeps the JT5 secure during operation, reduces wear on pipe threads and enables better alignment of pipe during makeup
• Open-top vise wrenches are designed to center the pipe better every time and provide an excellent view of the tool joint.
• Field-proven rack-and-pinion thrust drive designed for low maintenance and reliability.
• Hood removes easily for access to engine and service points.
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- BATTERY - SAE cold crank rating @ 0°F (-18°C) : 525 amps
- BATTERY - SAE reserve capacity rating : 85 min
- DIMENSIONS - Angle of approach : 18°
- DIMENSIONS - Angle of approach, w/cab:
- DIMENSIONS - Angle of departure: 18°
- DIMENSIONS - Drill rack entry angle, max:
- DIMENSIONS - Drill rack entry angle, tracks on ground:
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
- DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
- DIMENSIONS - Entry angle: 10-16°
- DIMENSIONS - Ground clearance:
- DIMENSIONS - Height : 70 in | 1.78 m
- DIMENSIONS - Length : 120 in | 3.1 m
- DIMENSIONS - Operating mass:
- DIMENSIONS - Transport height:
- DIMENSIONS - Transport height w/ cab:
- DIMENSIONS - Transport Length:
- DIMENSIONS - Weight: 3,690 lb | 1674 kg
- DIMENSIONS - Weight w/ cab:
- DIMENSIONS - Weight w/ full rack:
- DIMENSIONS - Width : 35.9 in | 91.2 cm
- DIMENSIONS - Width w/ cab:
- DRILLING FLUID SYSTEM ON BOARD - Flow, max: 5 gpm | 18.9 l/min
- DRILLING FLUID SYSTEM ON BOARD - Pressure, max: 750 psi | 51.7 bar
- FLUID CAPACITIES - Antifreeze tank:
- FLUID CAPACITIES - Diesel exhaust fluid tank:
- FLUID CAPACITIES - Engine cooling system:
- FLUID CAPACITIES - Engine oil w/filter:
- FLUID CAPACITIES - Fuel tank : 13 gal | 49 L
- FLUID CAPACITIES - Hydraulic reservoir : 8 gal | 30 L
- OPERATION - Backream diameter, soil dependent : 4.5 in | 114 mm
- OPERATION - Bore diameter: 2.5 in | 63.5 mm
- OPERATION - Carriage pullback travel speed: 130 fpm | 40 m/min
- OPERATION - Carriage thrust travel speed: 130 fpm | 40 m/min
- OPERATION - Daily average fuel usage (per hour):
- OPERATION - Ground travel speed forward/reverse: 1.53 mph | 2.46 km/h
- OPERATION - Pullback force: 5,000 lb | 22.2 kN
- OPERATION - Spindle speed (AT inner spindle), max:
- OPERATION - Spindle speed, max: 195 rpm
- OPERATION - Spindle torque (AT inner spindle), max:
- OPERATION - Spindle torque, max: 550 ft·lb | 746 N·m
- OPERATION - Thrust force: 4,100 lb | 18.2 kN
- POWER - Aspiration : Natural
- POWER - Bore: 3.07 in | 78 mm
- POWER - Cooling medium: Liquid
- POWER - Displacement : 68.6 in³ | 1.12 L
- POWER - Emissions compliance : EPA Tier 4
- POWER - Engine : Kubota® D1105
- POWER - Fuel: Diesel
- POWER - Injection: Indirect
- POWER - Manufacturer's gross power rating : 24.8 hp | 18.5 kW
- POWER - Number of cylinders: 3
- POWER - Rated speed: 3,000 rpm
- POWER - Stroke : 3.09 in | 78.5 mm
- POWER PIPE® HD - Bend radius, min : 70 ft | 21.3 m
- POWER PIPE® HD - Diameter of drill pipe: 1.13 in | 28.7 mm
- POWER PIPE® HD - Diameter of drill pipe, tool joint end : 1.88 in | 47.8 mm
- POWER PIPE® HD - Length of drill pipe, nominal : 59 in | 1.5 m
- POWER PIPE® HD - Weight of drill pipe : 16 lb | 7.25 kg
- VIBRATION LEVEL - Average vibration transmitted to the operator's hand and whole body during normal operation:
