Ditch Witch ST37X
| Make | Ditch Witch |
| Model | ST37X |
| Type | Mini Skid Steers |
How can we help?
Description
DITCH WITCH ST37X — STAND-ON TRENCHER
LOW MAINTENANCE. HIGH PERFORMANCE.
The innovative ST37X is the most powerful and durable machine in its horsepower class with an integrated digging system.
POWER
• Equipped with a 37-hp (27.6-kW) Stage V Yanmar® diesel engine providing best-in-class power for all machine functions.
• Maximum 4.7-mph (7.6-km/h) ground drive speed, in both forward and reverse.
PRODUCTIVITY
• Compact package increases productivity on tight jobsites and a heavy-duty chain with 50,000-lb tension creates a cleaner, more consistently deep and wide trench than an excavator can, and in less time.
• Standard dual-lever ground drive controls allow the operator to control each machine track independently for improved mobility on difficult jobsite conditions.
DESIGN
• The machine has no daily maintenance points and no grease zerks, improving ease of maintenance and reducing total cost of ownership.
• With 43 in (109 cm) of track on the ground, the machine has the stability to effectively cross-trench for added jobsite versatility.
MAXIMUM UPTIME
• A low-maintenance track-tensioning system features a grease cylinder for easy adjustments and track removal, the ST37X simplifying machine maintenance.
• The machine’s belt-free design reduces maintenance time and increases uptime.
SUPERIOR CUTOMER SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.
Specifications
- BATTERY - Auxiliary Power Outlet: 12V
- BATTERY - Cold Crank Rating @ 0°F (-18°C): 800 amps
- BATTERY - SAE Reserve Capacity Rating: 110 min
- DIMENSIONS - Angle of Approach: 30°
- DIMENSIONS - Angle of Departure: 27°
- DIMENSIONS - Boom Travel, Up/Down: 60°
- DIMENSIONS - Centerline Trench to Outside Edge of Unit, Right: 4-20 in | 102-508 mm
- DIMENSIONS - Centerline Trench to Outside Edge of Unit, right: 21-37 in | 533-940 mm
- DIMENSIONS - Digging Chain: 50K
- DIMENSIONS - Ground clearance, min, center/side: 7.4/3.7 in | 188/94 mm
- DIMENSIONS - Headshaft Height: 23 in | 584 mm
- DIMENSIONS - Headshaft Overhang: 18 in | 457 mm
- DIMENSIONS - Machine width, excluding tracks: 35 in | 890 mm
- DIMENSIONS - Overall height of machine: 57 in | 1450 mm
- DIMENSIONS - Overall length of machine, 36-in chain (L2): 130 in | 3302 mm
- DIMENSIONS - Overall length of machine, w/out chain: 104.5 in | 2654 mm
- DIMENSIONS - Overall width of machine: 42 in | 1065 mm
- DIMENSIONS - Swing Radius, Front, 36-in Chain: 81 in | 2057 mm
- DIMENSIONS - Swing Radius, Rear: 44 in | 1120 mm
- DIMENSIONS - Trench Depth, Max: 36 in | 914 mm
- DIMENSIONS - Trench Width, Max: 16 in | 406 mm
- DIMENSIONS - Wheelbase/track length: 43 in | 1092 mm
- FLUID CAPACITIES - Engine Oil : 5 qt | 4.7 L
- FLUID CAPACITIES - Fuel Tank: 10.5 gal | 40 L
- FLUID CAPACITIES - Hydraulic Reservoir: 9.2 gal | 35 L
- HYDRAULIC SYSTEM - Auxiliary Circuit:
- HYDRAULIC SYSTEM - Chain Speed: 369 f/min | 112 m/min
- HYDRAULIC SYSTEM - Combined Flow Rate: 13.9 gpm | 52.7 Lpm
- HYDRAULIC SYSTEM - Double Gear Pump:
- HYDRAULIC SYSTEM - Dual Hydrostatic Ground Drive Pumps:
- HYDRAULIC SYSTEM - Flow Rate: 15 gpm | 56.8 Lpm
- HYDRAULIC SYSTEM - Pressure: 3,625 psi | 250 bar
- NOISE LEVEL - Exterior: 103 dBA
- NOISE LEVEL - Operator: 89 dBA
- OPERATION - Tilt Backward/forward/right/left: 25° w/out tilting or sliding
- OPERATION - Forward/Reverse: 4.7 mph | 7.6 km/h
- OPERATION - Ground Drive Speed:
- OPERATION - Ground Pressure w/9-in (230 mm) Tracks : 5.5 psi | 0.38 bar
- OPERATION - Machine Weight (30-in Boom, 12-in Combo Chain): 4,110 lb | 1864 kg
- POWER - *Exceeding these operating angles will cause engine damage. This DOES NOT imply that the machine is stable to maximum angle of safe engine operation.:
- POWER - Bore: 3.46 in | 88 mm
- POWER - Displacement : 100.1 in³ | 1.64 L
- POWER - Emissions Compliance : EPA Stage V
- POWER - Engine : Yanmar® 3TNV88C
- POWER - Fuel: Diesel
- POWER - Manufacturer’s gross power rating (SAE J1995): 37 hp | 27.6 kW
- POWER - Number of Cylinders: 3
- POWER - Stroke : 3.54 in | 90 mm
- POWER - Tilt Angle, Max, Fore and Aft*: 30°
- POWER - Tilt Angle, Max, Side to Side*: 30°
