Ditch Witch RT120 QUAD
| Make | Ditch Witch |
| Model | RT120 QUAD |
| Type | Quad Trenchers |
How can we help?
Description
DITCH WITCH RT120 QUAD — RIDE-ON TRENCHERS
ENGINEERED WITH EVERYTHING BUT QUIT
The incredibly rugged Ditch Witch RT120 Quad is built for the toughest telecom and utility installations on the most formidable terrain. When you’ve got a lengthy utility or telecom installation, you’re bound to run into all types of terrain along the way. That’s when you’ll begin to realize the true value of the extraordinarily stout, powerful Ditch Witch® RT120 Quad. Its massive undercarriage, superior Quad Track System and three-speed, shift-on-the-fly ground drive combine to handle whatever the jobsite throws at you. And driving everything is a powerful, 121-hp (90-kW) Deutz diesel engine that is Tier 4i compliant, needing only a simple oxidation catalyst for after-treatment. With the RT120 Quad, nothing slows you down.
FEATURES AND BENEFITS
POWER
120-hp (89.5-kW) Deutz® diesel engine and reliable hydrostatic transmission keep the RT120 Quad running strong all day long.
PRODUCTIVITY
• Three-speed, shift-on-the-fly ground drive senses load conditions and automatically adjusts for maximum performance.
• Standard four-wheel drive and four-wheel steering.
• Best-in-class ground clearance of 15.5 inches (394 mm).
DESIGN
• Standard tilt frame configuration helps you dig a vertical trench on uneven ground.
• Equipped with an electrically-controlled pump with no cables to adjust and provides better response and controllability.
• Heavy-duty, robust track frames weigh 1,500 lb (680.4 kg) each (including track), providing a lower center of gravity for increased stability and drawbar.
SUPERIOR CUTOMER SUPPORT
Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.
ATTACHMENTS
• H1032 Plow
• H1052 Plow
• H910 Centerline Trencher
• H911 Traversing Trencher
• H1140 Saw
• A920 Backhoe
• RC120 Reel Carrier
Similar models may be shown in addition to the featured model. Equipment may be shown with options.
Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. See your dealer for counterweighing requirements.
Specifications
- Backfill Blade - Blade Drop Below Ground : 10 in | 254 mm
- Backfill Blade - Blade Height: 17 in | 430 mm
- Backfill Blade - Blade Width: 80 in | 2.03 m
- Backfill Blade - Lift Height Above Ground : 26 in | 660 mm
- Backfill Blade - Swing Angle, Max - Left/Right: 30°
- Backfill Blade - Tilt Angle - Up/Down: 24°
- Battery (2 Used) - Auxiliary Power Outlet: 12V, 10 amps
- Battery (2 Used) - Group : 65
- Battery (2 Used) - SAE Cold Crank @ 0°F (-18°C): 875 amps
- Battery (2 Used) - SAE Reserve Capacity: 165 min
- Dimensions - Angle of Approach: 34°
- Dimensions - Height: 117 in | 2.97 m
- Dimensions - Length, Nose to Rear Mount : 125 in | 3.18 m
- Dimensions - Thread: 71 in | 1.8 m
- Dimensions - Transport Length: 166 in | 4.22 m
- Dimensions - Wheelbase: 79 in | 2.01 m
- Dimensions - Width: 89 in | 2.26 m
- Fluid Capacities - Cooling System: 12.3 qt | 11.6 L
- Fluid Capacities - Engine Oil: 8.4 qt | 8 L
- Fluid Capacities - Fuel Tank: 38 gal | 144 L
- Fluid Capacities - Hydraulic Reservoir: 20 gal | 76 L
- Fluid Capacities - Hydraulic System: 25 gal | 95 L
- Hydraulic System @ 2,300 RPM - Attachment Pump and Relief Pressure: 6,200 psi | 430 bar
- Hydraulic System @ 2,300 RPM - Attachment Pump Capacity: 47.4 gpm | 179 l/min
- Hydraulic System @ 2,300 RPM - Auxiliary Pump Capacity : 13.8 gpm | 52 l/min
- Hydraulic System @ 2,300 RPM - Auxiliary Pump Relief Pressure: 3,300 psi | 227.5 bar
- Hydraulic System @ 2,300 RPM - Ground Drive Pump Capacity: 47.4 gpm | 179 l/min
- Hydraulic System @ 2,300 RPM - Ground Drive Pump Relief Pressure: 6,200 psi | 430 bar
- Noise Level - Exterior: 109 dBA sound power per ISO 6393
- Noise Level - Operator: 92 dBA sound pressure per ISO 6394
- Operation - Allowable Tractor Weight, Max: 26,200 lb | 11884 kg
- Operation - Basic Unit Weight: 13,600 lb | 6169 kg
- Operation - Coordinated Steer: 27 ft | 8.2 m
- Operation - Forward Speed:
- Operation - Front Counterweight: 1,300 lb | 590 kg
- Operation - Front Steer Only: 39.5 ft | 12 m
- Operation - Ground Clearance: 15.5 in | 394 mm
- Operation - High: 7.2 mph | 11.6 km/h
- Operation - Low: 2 mph | 3.2 km/h
- Operation - Medium: 4.4 mph | 7.1 km/h
- Operation - Reverse Speed:
- Operation - Side Counterweight (Each): 250 lb | 114 kg
- Operation - Vehicle Clearance Circle (SAE) Wall to Wall w/Backfill Blade:
- Power - Aspiration: Turbocharged, charge air cooled
- Power - Bore: 3.86 in (98 mm)
- Power - Cooling Medium: Liquid
- Power - Displacement: 221 in³ (3.6 L)
- Power - Emissions Compliance: EPA Tier 4i (EU Stage IIIB)
- Power - Engine: Deutz® TCD3.6L4
- Power - Engine Tilt Angles, Max - Longitudinal/Lateral: 30°
- Power - Fuel: Diesel
- Power - Injection: Direct
- Power - Manufacturer's Gross Power Rating (SAE J1995): 121 hp (90 kW)
- Power - Number of Cylinders: 4
- Power - Rated Speed: 2,300 rpm
- Power - Stroke: 4.72 in (120 mm)
- Power Train - Attachment Drive Transmission : Hydrostatic
- Power Train - Differentials : Planetary front and rear with rear steering
- Power Train - Ground Drive Transmission: Hydrostatic
- Power Train - Parking Brake: Disc, hand operated
- Power Train - Service Brake : Hydrostatic
- Power Train - Tracks: 450 x 86 x 42, rubber track, chevron pattern
- Vibration Level - During normal operation, vibration transmitted to the operator's:: Hand/arm: 8.12 m/sec² | Whole body: 1.44 m/sec²
- Vibration Level - Operator Seat Complies with ISO 7096: Yes
