• Financing
  • MyDealer
  • Locations
  • Careers

Ditch Witch VP30

Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Ditch Witch
Make Ditch Witch
Model VP30
Type Vibratory Plows

How can we help?


Description

DITCH WITCH VP30 — VIBRATORY PLOW YOUR ULTIMATE JOBSITE SOLUTION The Ditch Witch VP30 vibratory plow is the ideal, cost-effective solution for residential fiber installation, cable and lawn irrigation in tight spaces. With its compact design and 31-hp engine—the highest in its class—the VP30 is the all-around solution for your next job. FEATURES AND BENEFITS POWERFUL AND PRODUCTIVE • Powered by a 31-hp (23-kW) Briggs and Stratton® engine for maximum productivity. • Utilizes a high-drive track system that includes bolt-on, interchangeable rollers for longer lasting performance. • An industry-first variable flow control helps you precisely control the flow to the shaker box and adjust ground drive speed for varying ground conditions, improving overall productivity. DESIGN • Leveraging the same reliable and proven pivot design as the Ditch Witch CX-Series walk-behind trenchers, the VP30 pivot is maintenance-free for increased uptime. • The construction-grade, compact design allows for better maneuverability on tight, residential jobsites. • The simple, open design allows for easy service access and uses greaseless, sealed bearings to extend track assembly life. EASY TO USE • The VP30 is equipped with hydrostatic, skid-steer-style steering for easy operation. • The simple and reliable design includes a hydraulic system that eliminates vertical shafts and belts so operators don’t have linkages to adjust. • Easy-touch controls help reduce operator fatigue and enhance machine responsiveness. ATTACHMENT AND BLADE OPTIONS • Equipped with two new adjustable blades, the pull blade and feed blade, which can be adjusted between 6-in (152.4 mm) and 12-in (304.8 mm) to meet fiber installation-depth requirements in various areas. • An available RotoWitch® boring attachment results in fewer disturbances, less labor and less restoration than tearing up driveways and sidewalks to complete installation. SUPERIOR CUSTOMER SUPPORT Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you. Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.

Specifications

  • Dimensions - Ground Clearance w/Plow in Stow, Min: 6 in | 152 mm
  • Dimensions - Height w/Max Reel Diameter: 59 in | 1.50 m
  • Dimensions - Machine Height: 48 in | 1.22 m
  • Dimensions - Machine Length, Max: 91 in | 2.31 m
  • Dimensions - Machine Width: 35 in | 890 mm
  • Dimensions - Plow Blade Height in Stow: 47 in | 1.19 m
  • Dimensions - Plow Depth, Max: 12 in | 305 mm
  • Dimensions - Product Wheel Width, Max: 14 in | 355 mm
  • Dimensions - Reel Carrier Diameter, Max: 20 in | 508 mm
  • Dimensions - Track Length: 35 in | 890 mm
  • Fluid Capacities - Engine Oil w/Filter: 2.3 qt | 0.95 L
  • Fluid Capacities - Fuel Tank: 6.2 gal | 23.5 L
  • Fluid Capacities - Hydraulic Reservoir: 11.5 gal | 43.5 L
  • Hydraulic System - Auxiliary Circuit, Double Gear Pump: Flow Rate (Pump 1): 13.25 gpm | 60.3 l/min
  • Hydraulic System - Auxiliary Circuit, Double Gear Pump: Flow Rate (Pump 2): 3.74 gpm | 17 l/min
  • Hydraulic System - Auxiliary Circuit: Pressure: 3,000 psi | 207 bar
  • Hydraulic System - Ground Drive, Dual Hydrostatic Pumps: Pressure: 2,500 psi | 172 bar
  • Operation - Approach Angle w/Adjustable Feed Blade: 35°
  • Operation - Ground Drive Speed, Max: Forward: 1.41 mph | 2.27 km/h
  • Operation - Ground Drive Speed, Max: Reverse: 1.43 mph | 2.30 km/h
  • Operation - Ground Pressure: 4.1 psi | 0.28 bar
  • Operation - Machine Weight: 1,993 lb | 904 kg
  • Power - Bore: 3.37 in | 85.5 mm
  • Power - Cooling Medium: Air
  • Power - Displacement: 54.7 in³ | 0.90 L
  • Power - Engine: Briggs & Stratton® Vanguard™
  • Power - Fuel: Gasoline
  • Power - Manufacturer's Gross Power Rating (per SAW J1940): 31 hp | 23.1 kW
  • Power - Number of Cylinders: 2
  • Power - Rated Speed: 3,600 rpm
  • Power - Stroke: 3.07 in | 78 mm

Contact

Contact

Consignment

Request a Service

Vehicle being serviced

Please describe your service needs.

Vehicle History

×

JESCO Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

JESCO Employee Portal