• Financing
  • MyDealer
  • Locations
  • Careers
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
DD1100RS
AMERICAN AUGERS DIRECTIONAL DRILL — DD1100RS BENEFITS • Stairways with railing for safer wireline connectors • Equipped with rapid setup • Pipeloader transports with the rig FEATURES For those contractors who want to play with the big toys • The industry first in rapid setup technology • Up to 1,500 horsepower for the bores with big pipe welded together just waiting to be installed • Excellent speed without sacrificing power • Over 200,000 ft*lbs of breakout torque for those tough pipe joints • 4” drill fluid course accommodates up to 1,000 gpm of drill fluid for maximum fluid power DUAL POWER PACK (ROOTS) • Simultaneously run both power units • Permits one power unit to run while powering through the unused power unit • Allows one power unit to run, but keeps the unused power unit isolated • Excercise the ability to have one power unit running, but have the unused power unit removed • Unit maintains full power with single engine, but system runs with half rotational RPM and half carriage drive speed SAFETY • Es!Lok – Exit Side Lockout System with 1 mile (1.6 m) Range • ZAPALERT – Electrical Detection Device • Run on One Technology system (ROOTS) • Freestanding operator’s console with pressure gauges • Operator’s manual and other unit support materials Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications

Carriage System - Carriage Gearbox:
(6) Planetary Drives
Carriage System - Carriage Motors:
(6) 1017 cc Variable Displacement
Carriage System - Carriage System:
Rack & Pinion, (6) Pinion and Gear with Adjustable Force Limiter
Carriage System - Gearbox:
Carriage System - Hydraulic Pump:
(2) Closed Loop-Piston
Carriage System - Maximum Carriage Speed:
101 ft. (30.7 m)/minute
Carriage System - Maximum Thrust/Pullback:
1,100,000 lbs. (500 Tonnes)
Drill Rig - Cabin:
Drill Rig - Drill Angle:
10° - 18°
Drill Rig - Drill Pipe :
Range II – 34 ft. (10.4 m)
Drill Rig - Max. On-Board Baskets:
Drill Rig - Max. Pipe Basket Capacity:
Drill Rig - Maximum Travel Speed:
Drill Rig - Travel System:
Drill Rig Weights & Dimensions - Height:
11 ft. 10.25 in. (3.6 m)
Drill Rig Weights & Dimensions - Length:
64 ft. 10 in. (19.5 m)
Drill Rig Weights & Dimensions - Total Weight:
With Wrenches: 112,580 lbs. (51,065 kg)
Drill Rig Weights & Dimensions - Width:
8 ft. 2 in. (2.5m)
Miscellaneous - Auxiliary Power Unit:
Miscellaneous - Fluid Course:
Miscellaneous - Ground Bearing Pressure:
Miscellaneous - Max. Flow:
Miscellaneous - Max. Pressure:
Miscellaneous - Pipe Capacity:
Miscellaneous - Processor Controls:
Miscellaneous - Pump:
Miscellaneous - Self-propelled, Wireless control Travel Speed:
Power Train - Engine:
Caterpillar C-18 Tier 4i or Tier 3 Diesel (depending on country of purchase)
Power Train - Fuel Capacity:
650 U.S. Gallons (2,460 L)
Power Train - Hydraulic Capacity:
220 U.S. Gallons (833 L)
Power Train - Hydraulic Filter:
High Pressure Filtration to 6 Micron ABS
Power Train - Rating:
765 HP (570 kW)
Rotary Drive - :
Rotary Drive - Auxiliary Pump:
(1) Pressure Compensated-Piston
Rotary Drive - Fluid Course:
4 in. (102 mm)
Rotary Drive - Hydraulic Pump:
(2) Closed Loop-Piston
Rotary Drive - Maximum Mud Pressure:
1,500 psi (103 bar)
Rotary Drive - Maximum Rotary Speed:
85 RPM
Rotary Drive - Maximum Rotary Torque:
100,000 ft-lbs. (135,600 Nm) @ 0 – 31 RPM
Rotary Drive - Minimum Rotary Torque:
40,000 ft-lbs. (54,230 Nm) @ 0 – 75 RPM
Rotary Drive - Mud Blow Down Cylinder:
1 1/16 in. Bore x 4 in. Stroke (27 - 102 mm)
Rotary Drive - Mud Flow Rate:
Permits up to 1,000 U.S. Gallons (3,785 L)/per minute
Rotary Drive - Mud Shutoff Cylinder:
2 in. Bore x 12 in. Stroke (51 - 305 mm)
Rotary Drive - Rotary Brakes:
(4) Spring Applied, Hydraulic Release
Rotary Drive - Rotary Motor:
(4) 160cc, Axial Piston, Variable Displacement
Rotary Drive - Rotary System:
(4) Pinion and Gear Drive with Infinitely Variable Torque
Rotary Drive - Slip Spindle:
8 5/8 in. (219 mm)
Single Power Pack - :
Single Power Pack - Maximum Height:
9 ft. 5 in. (2.88 m)
Single Power Pack - Maximum Length:
19 ft. 8 in. (5.99 m)
Single Power Pack - Maximum Width:
8 ft. (2.43 m)
Single Power Pack - Total Weight:
35,500 lbs. (16,103 kg)
Transport Weights - Total Weight:
Transport Weights - Total Weight w/o Wrench:
Wrench - :
Wrench - Clamp/Grip Range:
3.5 in.– 10.5 in. (89 – 267 mm) OD
Wrench - Maximum Breakout Torque:
230,000 ft-lbs. (311,800 Nm)
Wrench - Maximum Makeup Torque:
100,183 ft-lbs. (135,800 Nm)
Wrench - Wrench Brake:
(1) Spring Applied, Hydraulic Release
Wrench - Wrench Motor:
(2) Hydraulic, LSHT, 12.5 CIR
Wrench - Wrench Travel:
Wrench can Travel the Full Length of the Thrust Frame
  • Specifications

    Specifications

    Carriage System - Carriage Gearbox:
    (6) Planetary Drives
    Carriage System - Carriage Motors:
    (6) 1017 cc Variable Displacement
    Carriage System - Carriage System:
    Rack & Pinion, (6) Pinion and Gear with Adjustable Force Limiter
    Carriage System - Gearbox:
    Carriage System - Hydraulic Pump:
    (2) Closed Loop-Piston
    Carriage System - Maximum Carriage Speed:
    101 ft. (30.7 m)/minute
    Carriage System - Maximum Thrust/Pullback:
    1,100,000 lbs. (500 Tonnes)
    Drill Rig - Cabin:
    Drill Rig - Drill Angle:
    10° - 18°
    Drill Rig - Drill Pipe :
    Range II – 34 ft. (10.4 m)
    Drill Rig - Max. On-Board Baskets:
    Drill Rig - Max. Pipe Basket Capacity:
    Drill Rig - Maximum Travel Speed:
    Drill Rig - Travel System:
    Drill Rig Weights & Dimensions - Height:
    11 ft. 10.25 in. (3.6 m)
    Drill Rig Weights & Dimensions - Length:
    64 ft. 10 in. (19.5 m)
    Drill Rig Weights & Dimensions - Total Weight:
    With Wrenches: 112,580 lbs. (51,065 kg)
    Drill Rig Weights & Dimensions - Width:
    8 ft. 2 in. (2.5m)
    Miscellaneous - Auxiliary Power Unit:
    Miscellaneous - Fluid Course:
    Miscellaneous - Ground Bearing Pressure:
    Miscellaneous - Max. Flow:
    Miscellaneous - Max. Pressure:
    Miscellaneous - Pipe Capacity:
    Miscellaneous - Processor Controls:
    Miscellaneous - Pump:
    Miscellaneous - Self-propelled, Wireless control Travel Speed:
    Power Train - Engine:
    Caterpillar C-18 Tier 4i or Tier 3 Diesel (depending on country of purchase)
    Power Train - Fuel Capacity:
    650 U.S. Gallons (2,460 L)
    Power Train - Hydraulic Capacity:
    220 U.S. Gallons (833 L)
    Power Train - Hydraulic Filter:
    High Pressure Filtration to 6 Micron ABS
    Power Train - Rating:
    765 HP (570 kW)
    Rotary Drive - :
    Rotary Drive - Auxiliary Pump:
    (1) Pressure Compensated-Piston
    Rotary Drive - Fluid Course:
    4 in. (102 mm)
    Rotary Drive - Hydraulic Pump:
    (2) Closed Loop-Piston
    Rotary Drive - Maximum Mud Pressure:
    1,500 psi (103 bar)
    Rotary Drive - Maximum Rotary Speed:
    85 RPM
    Rotary Drive - Maximum Rotary Torque:
    100,000 ft-lbs. (135,600 Nm) @ 0 – 31 RPM
    Rotary Drive - Minimum Rotary Torque:
    40,000 ft-lbs. (54,230 Nm) @ 0 – 75 RPM
    Rotary Drive - Mud Blow Down Cylinder:
    1 1/16 in. Bore x 4 in. Stroke (27 - 102 mm)
    Rotary Drive - Mud Flow Rate:
    Permits up to 1,000 U.S. Gallons (3,785 L)/per minute
    Rotary Drive - Mud Shutoff Cylinder:
    2 in. Bore x 12 in. Stroke (51 - 305 mm)
    Rotary Drive - Rotary Brakes:
    (4) Spring Applied, Hydraulic Release
    Rotary Drive - Rotary Motor:
    (4) 160cc, Axial Piston, Variable Displacement
    Rotary Drive - Rotary System:
    (4) Pinion and Gear Drive with Infinitely Variable Torque
    Rotary Drive - Slip Spindle:
    8 5/8 in. (219 mm)
    Single Power Pack - :
    Single Power Pack - Maximum Height:
    9 ft. 5 in. (2.88 m)
    Single Power Pack - Maximum Length:
    19 ft. 8 in. (5.99 m)
    Single Power Pack - Maximum Width:
    8 ft. (2.43 m)
    Single Power Pack - Total Weight:
    35,500 lbs. (16,103 kg)
    Transport Weights - Total Weight:
    Transport Weights - Total Weight w/o Wrench:
    Wrench - :
    Wrench - Clamp/Grip Range:
    3.5 in.– 10.5 in. (89 – 267 mm) OD
    Wrench - Maximum Breakout Torque:
    230,000 ft-lbs. (311,800 Nm)
    Wrench - Maximum Makeup Torque:
    100,183 ft-lbs. (135,800 Nm)
    Wrench - Wrench Brake:
    (1) Spring Applied, Hydraulic Release
    Wrench - Wrench Motor:
    (2) Hydraulic, LSHT, 12.5 CIR
    Wrench - Wrench Travel:
    Wrench can Travel the Full Length of the Thrust Frame

Contact

Contact

Consignment

Request a Service

Vehicle being serviced

Please describe your service needs.

Vehicle History

×

JESCO Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

JESCO Employee Portal