• Financing
  • MyDealer
  • Locations
  • Careers
DD660RS
DD660RS
DD660RS
DD660RS
DD660RS
DD660RS
DD660RS
DD660RS
AMERICAN AUGERS DIRECTIONAL DRILL — DD660RS BENEFITS • Stairways with railing for safer wireline connectors • Equipped with rapid setup • Pipeloader transports with the rig FEATURES Our newest Maxi rig design that provides the latest in mobility and performance • Rapid setup features to decrease the time and effort to get to work • Hydraulically adjusted pipe support ensuring the pipe joints are always in the right position • Optional pipe loader that transports on the drill unit • Dual power units that feature ROOTS (Run On One Technology System) to reduce fuel cost during the pilot bore • Standard Telematics for communicating with the rig during operation DUAL POWER PACK • Simultaneously run both power units • Permits one power unit to run while powering through the unused power unit • Allows one power unit to run, but keeps the unused power unit isolated • Excercise the ability to have one power unit running, but have the unused power unit removed • Unit maintains full power with a single engine, but the system runs with half rotational RPM and half carriage drive speed Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.

Specifications

Carriage System - Carriage Brakes:
(2) Only on Carriage
Carriage System - Carriage Motors:
(4) Radial Piston/Dual Displacement
Carriage System - Carriage System:
Rack & Pinion, (4) Pinion with Adjustable Force Limiter
Carriage System - Gearbox:
(4) Planetary Gearboxes
Carriage System - Hydraulic Pump:
(4) Piston Pump, Closed Loop
Carriage System - Maximum Carriage Speed:
107 ft. (33 m)/minute
Carriage System - Maximum Thrust/Pullback:
660,000 lbs. (300 Tonnes)
Drill Rig - Cabin:
x12 ft. skid (8x20 ft. available)
Drill Rig - Drill Angle:
10° - 18°
Drill Rig - Drill Pipe :
Range II – 30 ft. (9.1 m)
Drill Rig - Max. On-Board Baskets:
Drill Rig - Max. Pipe Basket Capacity:
Drill Rig - Maximum Travel Speed:
Drill Rig - Travel System:
Drill Rig Weights & Dimensions - Maximum Height (Transport):
12 ft. 1 in. (3.68 m)
Drill Rig Weights & Dimensions - Maximum Length:
64 ft. 10 in. (19.5 m)
Drill Rig Weights & Dimensions - Maximum Width:
8 ft. 2 in. (2.5m)
Drill Rig Weights & Dimensions - Travel Weight:
100,300 lbs. (47,763 kg)
Miscellaneous - Auxiliary Power Unit:
9.9 HP Hatz 1840 diesel engine for rig setup
Miscellaneous - Fluid Course:
Miscellaneous - Ground Bearing Pressure:
Miscellaneous - Max. Flow:
Miscellaneous - Max. Pressure:
Miscellaneous - Pipe Capacity:
4
Miscellaneous - Processor Controls:
Processor Controls Sauer Danfoss micro-processor controls with touch screen, optional data acquisition
Miscellaneous - Pump:
Miscellaneous - Self-propelled, Wireless control Travel Speed:
Power Pack W & D - :
Power Pack W & D - Maximum Height:
9 ft. 5 in. (2.88 m)
Power Pack W & D - Maximum Length:
19 ft. 8 in. (6 m)
Power Pack W & D - Maximum Width:
8 ft. (2.43 m)
Power Pack W & D - Total Weight:
35,500 lbs. (16,103 kg)
Power Train - Battery:
(2) Deka 908DMF 24 V, 1450 CCA
Power Train - Engine:
Cummins QSX15 Tier 4 Final (or Tier 3 depending on country of purchase)
Power Train - Fuel Capacity:
650 U.S. Gallons (1325 L)
Power Train - Hydraulic Filter:
High Pressure Filtration and Return to 6 Micron ABS
Power Train - Rating:
600 HP (447 kW) each
Rotary Drive - :
Rotary Drive - Auxiliary Pump:
(1) Piston Pump, pressure Compensated
Rotary Drive - Fluid Course:
3 3/4 in. (95.25 mm) for increased downhole hydraulic power
Rotary Drive - Hydraulic Pump:
(4) Piston Pump, Closed Loop
Rotary Drive - Maximum Mud Pressure:
1,500 psi (103 bar)
Rotary Drive - Maximum Rotary Speed:
90 RPM
Rotary Drive - Maximum Rotary Torque:
80,000 ft-lbs. (108,500 Nm) @ 0 – 34 RPM
Rotary Drive - Minimum Rotary Torque:
30,000 ft-lbs. (40,675 Nm) @ 0 – 90 RPM
Rotary Drive - Mud Flow Rate:
Permits up to 825 U.S. Gallons /minute
Rotary Drive - Mud Swivel:
Rotary Drive - Rotary Gearbox:
3 3/4 in. (95.25 mm) for increased downhole hydraulic power
Rotary Drive - Rotary System:
(4) Pinion & Gear Drive w/Infinitely Variable Torque
Transport Weights - Total Weight:
Transport Weights - Total Weight w/o Wrench:
Wrench - :
Wrench - Carriage to Wrench Clearance:
36 ft. (11 m) max.
Wrench - Clamp/Grip Range:
3.5 in.– 10.5 in. (89 – 267 mm) OD
Wrench - Maximum Breakout Torque:
220,000 ft. lbs. (298,280 Nm)
Wrench - Maximum Makeup Torque:
100,183 ft-lbs. (138,252 Nm)
Wrench - Wrench System:
Triple Jaw Wrenches with 12 in. (305 mm) separation
Wrench - Wrench Travel:
Wrench can Travel the Full Length of the Thrust Frame
  • Specifications

    Specifications

    Carriage System - Carriage Brakes:
    (2) Only on Carriage
    Carriage System - Carriage Motors:
    (4) Radial Piston/Dual Displacement
    Carriage System - Carriage System:
    Rack & Pinion, (4) Pinion with Adjustable Force Limiter
    Carriage System - Gearbox:
    (4) Planetary Gearboxes
    Carriage System - Hydraulic Pump:
    (4) Piston Pump, Closed Loop
    Carriage System - Maximum Carriage Speed:
    107 ft. (33 m)/minute
    Carriage System - Maximum Thrust/Pullback:
    660,000 lbs. (300 Tonnes)
    Drill Rig - Cabin:
    x12 ft. skid (8x20 ft. available)
    Drill Rig - Drill Angle:
    10° - 18°
    Drill Rig - Drill Pipe :
    Range II – 30 ft. (9.1 m)
    Drill Rig - Max. On-Board Baskets:
    Drill Rig - Max. Pipe Basket Capacity:
    Drill Rig - Maximum Travel Speed:
    Drill Rig - Travel System:
    Drill Rig Weights & Dimensions - Maximum Height (Transport):
    12 ft. 1 in. (3.68 m)
    Drill Rig Weights & Dimensions - Maximum Length:
    64 ft. 10 in. (19.5 m)
    Drill Rig Weights & Dimensions - Maximum Width:
    8 ft. 2 in. (2.5m)
    Drill Rig Weights & Dimensions - Travel Weight:
    100,300 lbs. (47,763 kg)
    Miscellaneous - Auxiliary Power Unit:
    9.9 HP Hatz 1840 diesel engine for rig setup
    Miscellaneous - Fluid Course:
    Miscellaneous - Ground Bearing Pressure:
    Miscellaneous - Max. Flow:
    Miscellaneous - Max. Pressure:
    Miscellaneous - Pipe Capacity:
    4
    Miscellaneous - Processor Controls:
    Processor Controls Sauer Danfoss micro-processor controls with touch screen, optional data acquisition
    Miscellaneous - Pump:
    Miscellaneous - Self-propelled, Wireless control Travel Speed:
    Power Pack W & D - :
    Power Pack W & D - Maximum Height:
    9 ft. 5 in. (2.88 m)
    Power Pack W & D - Maximum Length:
    19 ft. 8 in. (6 m)
    Power Pack W & D - Maximum Width:
    8 ft. (2.43 m)
    Power Pack W & D - Total Weight:
    35,500 lbs. (16,103 kg)
    Power Train - Battery:
    (2) Deka 908DMF 24 V, 1450 CCA
    Power Train - Engine:
    Cummins QSX15 Tier 4 Final (or Tier 3 depending on country of purchase)
    Power Train - Fuel Capacity:
    650 U.S. Gallons (1325 L)
    Power Train - Hydraulic Filter:
    High Pressure Filtration and Return to 6 Micron ABS
    Power Train - Rating:
    600 HP (447 kW) each
    Rotary Drive - :
    Rotary Drive - Auxiliary Pump:
    (1) Piston Pump, pressure Compensated
    Rotary Drive - Fluid Course:
    3 3/4 in. (95.25 mm) for increased downhole hydraulic power
    Rotary Drive - Hydraulic Pump:
    (4) Piston Pump, Closed Loop
    Rotary Drive - Maximum Mud Pressure:
    1,500 psi (103 bar)
    Rotary Drive - Maximum Rotary Speed:
    90 RPM
    Rotary Drive - Maximum Rotary Torque:
    80,000 ft-lbs. (108,500 Nm) @ 0 – 34 RPM
    Rotary Drive - Minimum Rotary Torque:
    30,000 ft-lbs. (40,675 Nm) @ 0 – 90 RPM
    Rotary Drive - Mud Flow Rate:
    Permits up to 825 U.S. Gallons /minute
    Rotary Drive - Mud Swivel:
    Rotary Drive - Rotary Gearbox:
    3 3/4 in. (95.25 mm) for increased downhole hydraulic power
    Rotary Drive - Rotary System:
    (4) Pinion & Gear Drive w/Infinitely Variable Torque
    Transport Weights - Total Weight:
    Transport Weights - Total Weight w/o Wrench:
    Wrench - :
    Wrench - Carriage to Wrench Clearance:
    36 ft. (11 m) max.
    Wrench - Clamp/Grip Range:
    3.5 in.– 10.5 in. (89 – 267 mm) OD
    Wrench - Maximum Breakout Torque:
    220,000 ft. lbs. (298,280 Nm)
    Wrench - Maximum Makeup Torque:
    100,183 ft-lbs. (138,252 Nm)
    Wrench - Wrench System:
    Triple Jaw Wrenches with 12 in. (305 mm) separation
    Wrench - Wrench Travel:
    Wrench can Travel the Full Length of the Thrust Frame

Contact

Contact

Consignment

Request a Service

Vehicle being serviced

Please describe your service needs.

Vehicle History

×

JESCO Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

JESCO Employee Portal