• Financing
  • MyDealer
  • Locations
  • Careers
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20
JT20

JT20 DIRECTIONAL DRILLS

With the Ditch Witch JT20 ® JT20 Horizontal Directional Drill, less is more. Much more. Its turbocharged 74-hp engine produces less noise for the operator—86 dBA, among the quietest in its class—while its slim yet durable profile allows you to take more jobs in more places.

FEATURES

• Auto-throttle feature saves fuel and reduces pollution by slowing the engine to idle after 15 seconds of inactivity; when you resume work, the auto-throttle engages.

• Industry-best cruise control system simplifies drilling and backreaming.

• Automated, intuitive carve mode reduces operator fatigue and is easy to set up and adjust; compatible with industry-leading TriHawk® HD housings and bits for superior efficiency and productivity in hard, compacted soils and soft rock.

• The compact JT20 has a high ratio of power to size, allowing you to install more utilities in tight, congested areas.

• Turbocharged, 74-hp (55- kW) Deutz® diesel engine is Tier-4 compliant, requiring no expensive after-treatment.

• Advanced cooling system uses five fewer gallons of fluid than competitive systems for exceptional efficiency and less environmental impact.

• Drilling fluid system pumps mud at 35 GPM; high fluid flows enable longer utility installations and better performance in sandy soils.

• Tethered ground drive controller allows you to maneuver the drilling unit to a position that provides better visibility and easier loading/ unloading.

• Exceptionally efficient Sauer H1 hydrostatic pumps control rotation and thrust; design enhancements include a larger displacement pump and simplified, two-speed hydraulic thrust circuit for increased reliability.

• Automated, intuitive carve mode reduces operator fatigue and is easy to set up and adjust; compatible with industry-leading TriHawk® HD housings and bits for superior efficiency and productivity in hard, compacted soils and soft rock.

• Large-capacity, automatic drill pipe lubrication system.

• Add-a-pipe feature places individual pipes into loading system without lifting pipe into the top of the pipe box.

• Coordinated makeup feature increases the life of drill pipe joints by automatically matching carriage speed with rotation during pipe makeup and breakout.

• Delivers 17,000 lb of thrust (75.6 kN) and 20,000 lb (89 kN) of pullback force for outstanding performance.

• Heavy-duty stakedown system allows you to push or pull with full machine thrust and remain secure in virtually any drilling condition.

• Dual independent rear stabilizers enhance stability on uneven or rough terrain.

WHEN YOU’RE MORE COMFORTABLE, YOU’RE MORE PRODUCTIVE.

THE JT20 HORIZONTAL DIRECTIONAL DRILL IS EXCEPTIONALLY PRODUCTIVE FOR MANY REASONS, INCLUDING THE ROOMY OPERATOR’S STATION WHERE YOU ARE IN TOTAL CONTROL.

FEATURES

• Simple, intuitive controls for all machine drilling functions.

• Industry-best cruise control system simplifies drilling and backreaming by reducing operator effort.

• Color LCD display provides engine diagnostics and informational messages.

• Ergonomic seat provides operator comfort, which results in greater productivity.

• Comfortable operator’s station provides excellent visibility of the drill pipe and pipeloading system; open-top vise wrenches are angled toward the operator for an excellent view of the tool joint.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.


Specifications

BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) :
950 amps
BATTERY (2 USED) - SAE reserve capacity rating :
195 min
DIMENSIONS - Angle of approach :
18°
DIMENSIONS - Angle of approach, w/cab:
DIMENSIONS - Angle of departure:
18°
DIMENSIONS - Entry angle:
10-14°
DIMENSIONS - Ground clearance:
DIMENSIONS - Height :
90 in | 2.29 m
DIMENSIONS - Length :
207 in | 5.26 m
DIMENSIONS - Operating mass:
DIMENSIONS - Transport height:
DIMENSIONS - Transport height w/ cab:
DIMENSIONS - Transport Length:
DIMENSIONS - Weight:
DIMENSIONS - Weight w/ cab:
DIMENSIONS - Weight w/ full rack:
11,890 lb | 5390 kg
DIMENSIONS - Width :
51.5 in | 1.31 m
DIMENSIONS - Width w/ cab:
DRILLING FLUID SYSTEM (ON BOARD) - Flow, max:
35 gpm | 132 l/min
DRILLING FLUID SYSTEM (ON BOARD) - Pressure, max:
1,000 psi | 69 bar
FLUID CAPACITIES - Antifreeze tank:
FLUID CAPACITIES - Diesel exhaust fluid tank:
FLUID CAPACITIES - Engine cooling system:
4.6 gal | 17 L
FLUID CAPACITIES - Engine oil w/filter:
8.5 quarts | 8 L
FLUID CAPACITIES - Fuel tank :
30 gal | 114 L
FLUID CAPACITIES - Hydraulic reservoir :
19 gal | 72 L
OPERATION - Backream diameter, soil dependent :
OPERATION - Bore diameter:
4 in | 102 mm
OPERATION - Carriage pullback travel speed:
140 fpm | 43 m/min
OPERATION - Carriage thrust travel speed:
140 fpm | 43 m/min
OPERATION - Daily average fuel usage (per hour):
OPERATION - Ground travel speed forward/reverse:
3.2 mph | 5.2 km/h
OPERATION - Pullback force:
20,000 lb | 89 kN
OPERATION - Spindle speed (AT inner spindle), max:
OPERATION - Spindle speed, max:
210 rpm
OPERATION - Spindle torque (AT inner spindle), max:
OPERATION - Spindle torque, max:
2,200 ft·lb | 2980 N·m
OPERATION - Thrust force:
17,000 lb | 75.6 kN
POWER (TIER 4) (HRC) - Aspiration :
Turbocharged
POWER (TIER 4) (HRC) - Bore:
3.62 in | 92 mm
POWER (TIER 4) (HRC) - Cooling medium:
Liquid
POWER (TIER 4) (HRC) - Displacement :
177 in³ | 2.9 L
POWER (TIER 4) (HRC) - Emissions compliance :
EPA Tier 4 | EU Stage IIIB
POWER (TIER 4) (HRC) - Engine :
Deutz® TD2.9L4
POWER (TIER 4) (HRC) - Estimated net power rating:
POWER (TIER 4) (HRC) - Fuel:
Diesel
POWER (TIER 4) (HRC) - Injection:
Direct
POWER (TIER 4) (HRC) - Manufacturer's gross power rating :
74 hp | 55 kW
POWER (TIER 4) (HRC) - Number of cylinders:
4
POWER (TIER 4) (HRC) - Rated speed:
2,600 rpm
POWER (TIER 4) (HRC) - Stroke :
4.33 in | 110 mm
POWER (TIER 4I) (LRC) - Aspiration :
Turbocharged
POWER (TIER 4I) (LRC) - Bore:
3.62 in | 92 mm
POWER (TIER 4I) (LRC) - Cooling medium:
Liquid
POWER (TIER 4I) (LRC) - Displacement :
177 in³ | 2.9 L
POWER (TIER 4I) (LRC) - Emissions compliance :
EPA Tier 4i | EU Stage IIIA
POWER (TIER 4I) (LRC) - Engine :
Deutz TD2.9L4
POWER (TIER 4I) (LRC) - Fuel:
Diesel
POWER (TIER 4I) (LRC) - Injection:
Direct
POWER (TIER 4I) (LRC) - Manufacturer's gross power rating :
74 hp | 55 kW
POWER (TIER 4I) (LRC) - Number of cylinders:
4
POWER (TIER 4I) (LRC) - Rated speed:
2,600 rpm
POWER (TIER 4I) (LRC) - Stroke :
4.33 in | 110 mm
POWER PIPE FORGED HD - Bend radius, min:
109 ft | 33.2 m
POWER PIPE FORGED HD - Diameter of drill pipe:
2.10 in | 53.3 mm
POWER PIPE FORGED HD - Diameter of drill pipe, tool joint end:
2.5 in | 63.5 mm
POWER PIPE FORGED HD - Length:
120 in | 3.05 m
POWER PIPE FORGED HD - Length of dril pipe, nominal:
POWER PIPE FORGED HD - Pipe diameter:
POWER PIPE FORGED HD - Weight of drill pipe & large box (48 pipe):
POWER PIPE FORGED HD - Weight of drill pipe & small box (24 pipe):
POWER PIPE FORGED HD - Weight of drill pipe and large box (28 pipe):
POWER PIPE FORGED HD - Weight of drill pipe and large box (40 pipe):
POWER PIPE FORGED HD - Weight of drill pipe and small box (16 pipe):
POWER PIPE FORGED HD - Weight of drill pipe and small box (20 pipe):
POWER PIPE FORGED HD - Weight of drill pipe, lined:
POWER PIPE FORGED HDX - Bend radius, min:
123 ft | 37.5 m
POWER PIPE FORGED HDX - Diameter of drill pipe:
2.38 in | 60.5 mm
POWER PIPE FORGED HDX - Diameter of tool joint:
2.63 in | 66.8 mm
POWER PIPE FORGED HDX - Length:
120 in | 3.05 m
POWER PIPE FORGED HDX - Weight of drill pipe:
POWER PIPE FORGED HDX - Weight of drill pipe and large box (28 pipe):
POWER PIPE FORGED HDX - Weight of drill pipe and small box (16 pipe):
POWER PIPE® HD - Bend radius, min:
107 ft | 32 m
POWER PIPE® HD - Diameter of drill pipe:
2.06 in | 52.3 mm
POWER PIPE® HD - Diameter of drill pipe, tool joint end:
2.63 in | 66.8 mm
POWER PIPE® HD - Joint diameter:
POWER PIPE® HD - Length:
POWER PIPE® HD - Length of drill pipe, nominal :
120 in | 3.05 m
POWER PIPE® HD - Pipe diameter :
POWER PIPE® HD - Weight of drill pipe & large box (50 pipe):
POWER PIPE® HD - Weight of drill pipe & small box (25 pipe):
POWER PIPE® HD - Weight of drill pipe, lined:
67 lb | 30.4 kg
  • Specifications

    Specifications

    BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) :
    950 amps
    BATTERY (2 USED) - SAE reserve capacity rating :
    195 min
    DIMENSIONS - Angle of approach :
    18°
    DIMENSIONS - Angle of approach, w/cab:
    DIMENSIONS - Angle of departure:
    18°
    DIMENSIONS - Entry angle:
    10-14°
    DIMENSIONS - Ground clearance:
    DIMENSIONS - Height :
    90 in | 2.29 m
    DIMENSIONS - Length :
    207 in | 5.26 m
    DIMENSIONS - Operating mass:
    DIMENSIONS - Transport height:
    DIMENSIONS - Transport height w/ cab:
    DIMENSIONS - Transport Length:
    DIMENSIONS - Weight:
    DIMENSIONS - Weight w/ cab:
    DIMENSIONS - Weight w/ full rack:
    11,890 lb | 5390 kg
    DIMENSIONS - Width :
    51.5 in | 1.31 m
    DIMENSIONS - Width w/ cab:
    DRILLING FLUID SYSTEM (ON BOARD) - Flow, max:
    35 gpm | 132 l/min
    DRILLING FLUID SYSTEM (ON BOARD) - Pressure, max:
    1,000 psi | 69 bar
    FLUID CAPACITIES - Antifreeze tank:
    FLUID CAPACITIES - Diesel exhaust fluid tank:
    FLUID CAPACITIES - Engine cooling system:
    4.6 gal | 17 L
    FLUID CAPACITIES - Engine oil w/filter:
    8.5 quarts | 8 L
    FLUID CAPACITIES - Fuel tank :
    30 gal | 114 L
    FLUID CAPACITIES - Hydraulic reservoir :
    19 gal | 72 L
    OPERATION - Backream diameter, soil dependent :
    OPERATION - Bore diameter:
    4 in | 102 mm
    OPERATION - Carriage pullback travel speed:
    140 fpm | 43 m/min
    OPERATION - Carriage thrust travel speed:
    140 fpm | 43 m/min
    OPERATION - Daily average fuel usage (per hour):
    OPERATION - Ground travel speed forward/reverse:
    3.2 mph | 5.2 km/h
    OPERATION - Pullback force:
    20,000 lb | 89 kN
    OPERATION - Spindle speed (AT inner spindle), max:
    OPERATION - Spindle speed, max:
    210 rpm
    OPERATION - Spindle torque (AT inner spindle), max:
    OPERATION - Spindle torque, max:
    2,200 ft·lb | 2980 N·m
    OPERATION - Thrust force:
    17,000 lb | 75.6 kN
    POWER (TIER 4) (HRC) - Aspiration :
    Turbocharged
    POWER (TIER 4) (HRC) - Bore:
    3.62 in | 92 mm
    POWER (TIER 4) (HRC) - Cooling medium:
    Liquid
    POWER (TIER 4) (HRC) - Displacement :
    177 in³ | 2.9 L
    POWER (TIER 4) (HRC) - Emissions compliance :
    EPA Tier 4 | EU Stage IIIB
    POWER (TIER 4) (HRC) - Engine :
    Deutz® TD2.9L4
    POWER (TIER 4) (HRC) - Estimated net power rating:
    POWER (TIER 4) (HRC) - Fuel:
    Diesel
    POWER (TIER 4) (HRC) - Injection:
    Direct
    POWER (TIER 4) (HRC) - Manufacturer's gross power rating :
    74 hp | 55 kW
    POWER (TIER 4) (HRC) - Number of cylinders:
    4
    POWER (TIER 4) (HRC) - Rated speed:
    2,600 rpm
    POWER (TIER 4) (HRC) - Stroke :
    4.33 in | 110 mm
    POWER (TIER 4I) (LRC) - Aspiration :
    Turbocharged
    POWER (TIER 4I) (LRC) - Bore:
    3.62 in | 92 mm
    POWER (TIER 4I) (LRC) - Cooling medium:
    Liquid
    POWER (TIER 4I) (LRC) - Displacement :
    177 in³ | 2.9 L
    POWER (TIER 4I) (LRC) - Emissions compliance :
    EPA Tier 4i | EU Stage IIIA
    POWER (TIER 4I) (LRC) - Engine :
    Deutz TD2.9L4
    POWER (TIER 4I) (LRC) - Fuel:
    Diesel
    POWER (TIER 4I) (LRC) - Injection:
    Direct
    POWER (TIER 4I) (LRC) - Manufacturer's gross power rating :
    74 hp | 55 kW
    POWER (TIER 4I) (LRC) - Number of cylinders:
    4
    POWER (TIER 4I) (LRC) - Rated speed:
    2,600 rpm
    POWER (TIER 4I) (LRC) - Stroke :
    4.33 in | 110 mm
    POWER PIPE FORGED HD - Bend radius, min:
    109 ft | 33.2 m
    POWER PIPE FORGED HD - Diameter of drill pipe:
    2.10 in | 53.3 mm
    POWER PIPE FORGED HD - Diameter of drill pipe, tool joint end:
    2.5 in | 63.5 mm
    POWER PIPE FORGED HD - Length:
    120 in | 3.05 m
    POWER PIPE FORGED HD - Length of dril pipe, nominal:
    POWER PIPE FORGED HD - Pipe diameter:
    POWER PIPE FORGED HD - Weight of drill pipe & large box (48 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe & small box (24 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe and large box (28 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe and large box (40 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe and small box (16 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe and small box (20 pipe):
    POWER PIPE FORGED HD - Weight of drill pipe, lined:
    POWER PIPE FORGED HDX - Bend radius, min:
    123 ft | 37.5 m
    POWER PIPE FORGED HDX - Diameter of drill pipe:
    2.38 in | 60.5 mm
    POWER PIPE FORGED HDX - Diameter of tool joint:
    2.63 in | 66.8 mm
    POWER PIPE FORGED HDX - Length:
    120 in | 3.05 m
    POWER PIPE FORGED HDX - Weight of drill pipe:
    POWER PIPE FORGED HDX - Weight of drill pipe and large box (28 pipe):
    POWER PIPE FORGED HDX - Weight of drill pipe and small box (16 pipe):
    POWER PIPE® HD - Bend radius, min:
    107 ft | 32 m
    POWER PIPE® HD - Diameter of drill pipe:
    2.06 in | 52.3 mm
    POWER PIPE® HD - Diameter of drill pipe, tool joint end:
    2.63 in | 66.8 mm
    POWER PIPE® HD - Joint diameter:
    POWER PIPE® HD - Length:
    POWER PIPE® HD - Length of drill pipe, nominal :
    120 in | 3.05 m
    POWER PIPE® HD - Pipe diameter :
    POWER PIPE® HD - Weight of drill pipe & large box (50 pipe):
    POWER PIPE® HD - Weight of drill pipe & small box (25 pipe):
    POWER PIPE® HD - Weight of drill pipe, lined:
    67 lb | 30.4 kg

Contact

Contact

Consignment

Request a Service

Vehicle being serviced

Please describe your service needs.

Vehicle History

×

JESCO Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location

×

JESCO Employee Portal