• Financing
  • MyDealer
  • Locations
  • Careers
JT28
JT28
JT28
JT28
JT28
JT28
JT28
JT28
JT28
JT28
JT28
JT28

Ditch Witch JT28

DW Directional Drills


How can we help?

(301) 874-5500

JT28 HORIZONTAL DIRECTIONAL DRILL

PERFORMANCE IN FULL VIEW

More than just brute force, the JT28 puts the operator first. Built from direct customer feedback, the JT28 features best-in-class comfort, premier LCD display and a superior view of all machine functions – giving you a new outlook on what productivity truly is.

POWER

A 130-hp (97-kW) Tier 4 Cummins diesel engine is the most power in its class. 28,000 lb. (124.6 kN) of thrust and pullback provides the power to efficiently get the job done and move on to the next. An exclusive rotational drive with 4,200 ft-lb (5694 n-m) of torque and a unique, single-motor system results in smoother operation.

PRODUCTIVITY

Narrower operational width provides greater maneuverability and productivity in tight spaces. Intuitive, easy-to-use carve mode simplifies operation and improves productivity, making it exceptionally easy to install pipe and cables of up to 12 inches (30 cm) in diameter at length of up to 500 feet (152 m).

INNOVATIVE DESIGN

Simple, field-proven pipe loading system with a lower center of gravity helps increase stability. Dual-pivot drill frame allows for steeper entry angles without raising tracks off the ground. No grease zerks and all daily maintenance points are in an easy-to-access location minimizing upkeep and maximizing uptime.

SERVICEABILITY

A comfortable operator’s station built from direct customer feedback offers you the choice of single-handed control or dual joysticks for more thrust and rotational control, minimizing training time. Open-top vise wrenches are angled toward the operator, helping provide an excellent view of the tool joint when making up and breaking out pipe. LCD display provides engine diagnostics and informational messages directly to you.

SUPERIOR CUSTOMER SUPPORT

Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

FEATURES

• 130-hp (97-kW) Tier 4 Cummins® diesel engine has the most power in its class.

• Exclusive rotational drive with 4,200 ft·lb (5694 N·m) of torque and a unique single-motor system result in smoother operation.

• Comfortable operator's station with your choice of single-handed or dual joysticks for more thrust, rotation control and minimal training time.

• Premier LCD display provides operator with engine diagnostics and informational messages.

• Open-top vise wrenches are angled toward the operator helping provide an excellent view of the tool joint when making up and breaking out pipe.

• Daily maintenance points in one easy-to-access location with no grease zerks, minimizing upkeep and downtime.

• Narrower operational width than competitors' models for greater maneuverability and productivity in tight spaces.

• 28,000 lbs (124.6 kN) of thrust and pullback provide the power to efficiently get the job done.

• Intuitive, easy-to-use carve mode simplifies operation and improves productivity.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.


JT28 HORIZONTAL DIRECTIONAL DRILL

PERFORMANCE IN FULL VIEW

More than just brute force, the JT28 puts the operator first. Built from direct customer feedback, the JT28 features best-in-class comfort, premier LCD display and a superior view of all machine functions – giving you a new outlook on what productivity truly is.

POWER

A 130-hp (97-kW) Tier 4 Cummins diesel engine is the most power in its class. 28,000 lb. (124.6 kN) of thrust and pullback provides the power to efficiently get the job done and move on to the next. An exclusive rotational drive with 4,200 ft-lb (5694 n-m) of torque and a unique, single-motor system results in smoother operation.

PRODUCTIVITY

Narrower operational width provides greater maneuverability and productivity in tight spaces. Intuitive, easy-to-use carve mode simplifies operation and improves productivity, making it exceptionally easy to install pipe and cables of up to 12 inches (30 cm) in diameter at length of up to 500 feet (152 m).

INNOVATIVE DESIGN

Simple, field-proven pipe loading system with a lower center of gravity helps increase stability. Dual-pivot drill frame allows for steeper entry angles without raising tracks off the ground. No grease zerks and all daily maintenance points are in an easy-to-access location minimizing upkeep and maximizing uptime.

SERVICEABILITY

A comfortable operator’s station built from direct customer feedback offers you the choice of single-handed control or dual joysticks for more thrust and rotational control, minimizing training time. Open-top vise wrenches are angled toward the operator, helping provide an excellent view of the tool joint when making up and breaking out pipe. LCD display provides engine diagnostics and informational messages directly to you.

SUPERIOR CUSTOMER SUPPORT

Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

FEATURES

• 130-hp (97-kW) Tier 4 Cummins® diesel engine has the most power in its class.

• Exclusive rotational drive with 4,200 ft·lb (5694 N·m) of torque and a unique single-motor system result in smoother operation.

• Comfortable operator's station with your choice of single-handed or dual joysticks for more thrust, rotation control and minimal training time.

• Premier LCD display provides operator with engine diagnostics and informational messages.

• Open-top vise wrenches are angled toward the operator helping provide an excellent view of the tool joint when making up and breaking out pipe.

• Daily maintenance points in one easy-to-access location with no grease zerks, minimizing upkeep and downtime.

• Narrower operational width than competitors' models for greater maneuverability and productivity in tight spaces.

• 28,000 lbs (124.6 kN) of thrust and pullback provide the power to efficiently get the job done.

• Intuitive, easy-to-use carve mode simplifies operation and improves productivity.

Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown.


Specifications

BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) :
950 amps
BATTERY (2 USED) - SAE reserve capacity rating :
195 min
DIMENSIONS - Angle of approach :
DIMENSIONS - Angle of approach, w/cab:
DIMENSIONS - Angle of departure:
DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
DIMENSIONS - Entry angle:
DIMENSIONS - Entry angle, max:
9-20°
DIMENSIONS - Entry angle, tracks on ground:
9-17°
DIMENSIONS - Ground clearance:
5.7 in | 145 mm
DIMENSIONS - Height :
DIMENSIONS - Length :
DIMENSIONS - Operating mass:
DIMENSIONS - Transport height:
DIMENSIONS - Transport height w/ cab:
99.5 in | 2.53 m
DIMENSIONS - Transport Length:
232.5 in | 5.90 m
DIMENSIONS - Weight:
DIMENSIONS - Weight w/ cab:
21,360 lb | 9689 kg
DIMENSIONS - Weight w/ full rack:
DIMENSIONS - Width :
DIMENSIONS - Width w/ cab:
87 in | 2.2 m
DITCH WITCH FORGED HDX - Bend radius, min:
123 ft | 37.5 m
DITCH WITCH FORGED HDX - Joint diameter:
2.63 in | 67 mm
DITCH WITCH FORGED HDX - Length :
120 in | 3.05 m
DITCH WITCH FORGED HDX - Pipe diameter:
2.38 in | 60 mm
DITCH WITCH FORGED HDX - Weight of drill pipe, lined :
74 lb | 33.6 kg
DITCH WITCH FORGED HDX - Weight of lined drill pipe & large box (55 pipe):
4,877 lb | 2212 kg
DITCH WITCH FORGED HDX - Weight of lined drill pipe & small box (25 pipe) :
2,420 lb | 1098 kg
DRILLING FULUID SYSTEM ON BOARD - Flow, max:
50 gpm | 189 L/min
DRILLING FULUID SYSTEM ON BOARD - Pressure, max:
1,200 psi | 83 bar
FLUID CAPACITIES - Antifreeze tank:
FLUID CAPACITIES - Diesel exhaust fluid tank:
FLUID CAPACITIES - Engine cooling system:
FLUID CAPACITIES - Engine oil w/filter:
FLUID CAPACITIES - Fuel tank, Tier 3:
56 gal | 212 L
FLUID CAPACITIES - Fuel tank, Tier 4:
48 gal | 182 L
FLUID CAPACITIES - Hydraulic reservoir :
27 gal | 102 L
NOISE LEVEL - Exterior sound power:
104 dBA
NOISE LEVEL - Operator sound:
86 dBA
NOISE LEVEL - Operator sound w/cab:
80 dBA
OPERATION - Backream diameter, soil dependent :
OPERATION - Bore diameter:
OPERATION - Carriage pullback travel speed:
190 fpm | 58 m/min
OPERATION - Carriage thrust travel speed:
182 fpm | 55 m/min
OPERATION - Ground travel speed forward:
2.8 mph | 4.6 km/h
OPERATION - Ground travel speed reverse:
2.8 mph | 4.6 km/h
OPERATION - Pullback force:
28,000 lb | 124 kN
OPERATION - Spindle speed (AT inner spindle), max:
OPERATION - Spindle speed, max:
220 rpm
OPERATION - Spindle torque (AT inner spindle), max:
OPERATION - Spindle torque, max:
4,200 ft·lb | 5690 N·m
OPERATION - Thrust force:
28,000 lb | 124 kN
POWER - Aspiration :
Turbocharged & charge air cooled
POWER - Bore:
4.21 in | 107 mm
POWER - Cooling medium:
Liquid
POWER - Displacement :
275 in³ | 4.5 L
POWER - Emissions compliance Tier 4 :
EPA Tier 4 | EU Stage IV
POWER - Emissons compliance Tier 3 :
EPA Tier 3 | EU Stage IIIA
POWER - Engine :
Cummins® QSB4.5
POWER - Fuel:
Diesel
POWER - Injection:
Direct
POWER - Manufacturer's gross power rating :
130 hp | 97 kW
POWER - Number of cylinders:
4
POWER - Rated speed Tier 3/Tier 4:
2,500 rpm
POWER - Stroke :
4.88 in | 124 mm
POWER PIPE FORGED HD - Bend radius, min:
123 ft | 37.5 m
POWER PIPE FORGED HD - Joint diameter:
2.75 in | 70 mm
POWER PIPE FORGED HD - Length:
118 in | 3 m
POWER PIPE FORGED HD - Pipe diameter:
2.38 in | 60 mm
POWER PIPE FORGED HD - Weight of drill pipe, lined :
76 lb | 34.5 kg
POWER PIPE FORGED HD - Weight of lined drill pipe & large box (55 pipe):
4,987 lb | 2262 kg
POWER PIPE FORGED HD - Weight of lined drill pipe & small box (25 pipe) :
2,470 lb | 1120 kg
POWER PIPE® HD - Bend radius, min:
123 ft | 37.5 m
POWER PIPE® HD - Diameter of drill pipe, tool joint end:
POWER PIPE® HD - Joint diameter:
2.75 in | 70 mm
POWER PIPE® HD - Length:
118 in | 3 m
POWER PIPE® HD - Length of dril pipe, nominal:
POWER PIPE® HD - Pipe diameter:
2.38 in | 60 mm
POWER PIPE® HD - Weight of drill pipe & large box (48 pipe):
POWER PIPE® HD - Weight of drill pipe & small box (24 pipe):
POWER PIPE® HD - Weight of drill pipe and large box (40 pipe):
POWER PIPE® HD - Weight of drill pipe and small box (20 pipe):
POWER PIPE® HD - Weight of drill pipe, lined:
88 lb | 40 kg
POWER PIPE® HD - Weight of lined drill pipe & large box (55 pipe) :
5,647 lb | 2562 kg
POWER PIPE® HD - Weight of lined drill pipe & small box (25 pipe):
2,770 lb | 1257 kg
  • Specifications

    Specifications

    BATTERY (2 USED) - SAE cold crank rating @ 0°F (-18°C) :
    		950 amps
    BATTERY (2 USED) - SAE reserve capacity rating :
    		195 min
    DIMENSIONS - Angle of approach :
    DIMENSIONS - Angle of approach, w/cab:
    DIMENSIONS - Angle of departure:
    DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4):
    DIMENSIONS - Drilling unit operating mass (water tank empty, 50 drill pipes, T4i):
    DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4):
    DIMENSIONS - Drilling unit operating mass (water tank full, 50 drill pipes, T4i):
    DIMENSIONS - Entry angle:
    DIMENSIONS - Entry angle, max:
    		9-20°
    DIMENSIONS - Entry angle, tracks on ground:
    		9-17°
    DIMENSIONS - Ground clearance:
    		5.7 in | 145 mm
    DIMENSIONS - Height :
    DIMENSIONS - Length :
    DIMENSIONS - Operating mass:
    DIMENSIONS - Transport height:
    DIMENSIONS - Transport height w/ cab:
    		99.5 in | 2.53 m
    DIMENSIONS - Transport Length:
    		232.5 in | 5.90 m
    DIMENSIONS - Weight:
    DIMENSIONS - Weight w/ cab:
    		21,360 lb | 9689 kg
    DIMENSIONS - Weight w/ full rack:
    DIMENSIONS - Width :
    DIMENSIONS - Width w/ cab:
    		87 in | 2.2 m
    DITCH WITCH FORGED HDX - Bend radius, min:
    		123 ft | 37.5 m
    DITCH WITCH FORGED HDX - Joint diameter:
    		2.63 in | 67 mm
    DITCH WITCH FORGED HDX - Length :
    		120 in | 3.05 m
    DITCH WITCH FORGED HDX - Pipe diameter:
    		2.38 in | 60 mm
    DITCH WITCH FORGED HDX - Weight of drill pipe, lined :
    		74 lb | 33.6 kg
    DITCH WITCH FORGED HDX - Weight of lined drill pipe & large box (55 pipe):
    		4,877 lb | 2212 kg
    DITCH WITCH FORGED HDX - Weight of lined drill pipe & small box (25 pipe) :
    		2,420 lb | 1098 kg
    DRILLING FULUID SYSTEM ON BOARD - Flow, max:
    		50 gpm | 189 L/min
    DRILLING FULUID SYSTEM ON BOARD - Pressure, max:
    		1,200 psi | 83 bar
    FLUID CAPACITIES - Antifreeze tank:
    FLUID CAPACITIES - Diesel exhaust fluid tank:
    FLUID CAPACITIES - Engine cooling system:
    FLUID CAPACITIES - Engine oil w/filter:
    FLUID CAPACITIES - Fuel tank, Tier 3:
    		56 gal | 212 L
    FLUID CAPACITIES - Fuel tank, Tier 4:
    		48 gal | 182 L
    FLUID CAPACITIES - Hydraulic reservoir :
    		27 gal | 102 L
    NOISE LEVEL - Exterior sound power:
    		104 dBA
    NOISE LEVEL - Operator sound:
    		86 dBA
    NOISE LEVEL - Operator sound w/cab:
    		80 dBA
    OPERATION - Backream diameter, soil dependent :
    OPERATION - Bore diameter:
    OPERATION - Carriage pullback travel speed:
    		190 fpm | 58 m/min
    OPERATION - Carriage thrust travel speed:
    		182 fpm | 55 m/min
    OPERATION - Ground travel speed forward:
    		2.8 mph | 4.6 km/h
    OPERATION - Ground travel speed reverse:
    		2.8 mph | 4.6 km/h
    OPERATION - Pullback force:
    		28,000 lb | 124 kN
    OPERATION - Spindle speed (AT inner spindle), max:
    OPERATION - Spindle speed, max:
    		220 rpm
    OPERATION - Spindle torque (AT inner spindle), max:
    OPERATION - Spindle torque, max:
    		4,200 ft·lb | 5690 N·m
    OPERATION - Thrust force:
    		28,000 lb | 124 kN
    POWER - Aspiration :
    		Turbocharged & charge air cooled
    POWER - Bore:
    		4.21 in | 107 mm
    POWER - Cooling medium:
    		Liquid
    POWER - Displacement :
    		275 in³ | 4.5 L
    POWER - Emissions compliance Tier 4 :
    		EPA Tier 4 | EU Stage IV
    POWER - Emissons compliance Tier 3 :
    		EPA Tier 3 | EU Stage IIIA
    POWER - Engine :
    		Cummins® QSB4.5
    POWER - Fuel:
    		Diesel
    POWER - Injection:
    		Direct
    POWER - Manufacturer's gross power rating :
    		130 hp | 97 kW
    POWER - Number of cylinders:
    		4
    POWER - Rated speed Tier 3/Tier 4:
    		2,500 rpm
    POWER - Stroke :
    		4.88 in | 124 mm
    POWER PIPE FORGED HD - Bend radius, min:
    		123 ft | 37.5 m
    POWER PIPE FORGED HD - Joint diameter:
    		2.75 in | 70 mm
    POWER PIPE FORGED HD - Length:
    		118 in | 3 m
    POWER PIPE FORGED HD - Pipe diameter:
    		2.38 in | 60 mm
    POWER PIPE FORGED HD - Weight of drill pipe, lined :
    		76 lb | 34.5 kg
    POWER PIPE FORGED HD - Weight of lined drill pipe & large box (55 pipe):
    		4,987 lb | 2262 kg
    POWER PIPE FORGED HD - Weight of lined drill pipe & small box (25 pipe) :
    		2,470 lb | 1120 kg
    POWER PIPE® HD - Bend radius, min:
    		123 ft | 37.5 m
    POWER PIPE® HD - Diameter of drill pipe, tool joint end:
    POWER PIPE® HD - Joint diameter:
    		2.75 in | 70 mm
    POWER PIPE® HD - Length:
    		118 in | 3 m
    POWER PIPE® HD - Length of dril pipe, nominal:
    POWER PIPE® HD - Pipe diameter:
    		2.38 in | 60 mm
    POWER PIPE® HD - Weight of drill pipe & large box (48 pipe):
    POWER PIPE® HD - Weight of drill pipe & small box (24 pipe):
    POWER PIPE® HD - Weight of drill pipe and large box (40 pipe):
    POWER PIPE® HD - Weight of drill pipe and small box (20 pipe):
    POWER PIPE® HD - Weight of drill pipe, lined:
    		88 lb | 40 kg
    POWER PIPE® HD - Weight of lined drill pipe & large box (55 pipe) :
    		5,647 lb | 2562 kg
    POWER PIPE® HD - Weight of lined drill pipe & small box (25 pipe):
    		2,770 lb | 1257 kg

Other DW Directional Drills Models

John Deere
Wirtgen
Kleemann
Vogele
Hamm
Ditch Witch
Topcon
Magni

Contact

Contact

Consignment

Request a Service

Vehicle being serviced

Please describe your service needs.

Vehicle History

×

JESCO Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location

×

JESCO Employee Portal